HP ProBook 650 Maintenance and Service Guide - Page 67
Base enclosure, Memory see
View all HP ProBook 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Base enclosure IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Description Base enclosure For 14" products For 15" products Spare part number 840712-001 840725-001 Before removing the base enclosure, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Service door (see Service door on page 37). b. Remove the battery (see Battery on page 38) c. Hard drive (see Hard drive on page 39). d. Solid-state drive (see Solid-state drive (select products only) on page 41). e. WWAN module (see WWAN module (select products only) on page 42). f. WLAN module (see WLAN module on page 44). g. Optical drive (see Optical drive on page 46). h. Keyboard (see Keyboard on page 48). i. Memory (see Memory on page 51). j. Hinge covers (see Hinge cover on page 55). Remove the base enclosure: 1. Disconnect the fingerprint reader cable (1), the speaker cable (2), the display cable (3), and the pointing stick cable (4). Component replacement procedures 57