HP ProBook 650 Maintenance and Service Guide - Page 86
Near Field Communication module, Solid-state drive see
View all HP ProBook 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Near Field Communication module Description Near Field Communication (NFC) module For 14" products For 15" products Near Field Communication (NFC) cable For 14" products For 15" products Spare part number 840661-001 840661-001 840729-001 840661-001 840729-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the NFC module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Service door (see Service door on page 37). b. Remove the battery (see Battery on page 38) c. Hard drive (see Hard drive on page 39). d. Solid-state drive (see Solid-state drive (select products only) on page 41). e. WWAN module (see WWAN module (select products only) on page 42). f. WLAN module (see WLAN module on page 44). g. Optical drive (see Optical drive on page 46). h. Keyboard (see Keyboard on page 48). i. Hinge covers (see Hinge cover on page 55). j. Base enclosure (see Base enclosure on page 57). k. System board (see System board on page 59). l. Fan/heat sink assembly (see Fan and heat sink assembly on page 61). m. Top cover (see Top cover and TouchPad on page 65). Remove the NFC module: ▲ Disconnect the NFC module (1), and then remove it (2). 76 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts