HP ProBook 650 Maintenance and Service Guide - Page 52
WWAN module (select products only), Remove 1 Phillips M2.0x8 screw
View all HP ProBook 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the solid-state drive, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Service door (see Service door on page 37). b. Remove the battery (see Battery on page 38) c. Hard drive (see Hard drive on page 39). Remove the solid-state drive: ▲ Remove 1 Phillips M2.0x8 screw (1), and then remove the solid-state drive (2). Reverse this procedure to install the solid-state drive. WWAN module (select products only) NOTE: The WWAN module spare part kit includes the cable. Description WWAN module Foxconn Amstel LTE/EVDO/HSPA+ w/GPS M.2 42 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts Spare part number 822828-001