HP RP7 Maintenance & Service Guide HP RP7 Retail System Model 7800 - Page 112
the slots in the cage, and then remove the drive connector from the cage.
View all HP RP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
10. Disconnect the drive data cables and power cable. Figure 8-8 Disconnecting the drive cables from the system board 11. Remove the drive cage and cable assembly from the computer. 12. Remove the two Torx screws that secure the drive connector to the cage, remove the wires from the slots in the cage, and then remove the drive connector from the cage. Figure 8-9 Removing the connector 102 Chapter 8 Removal and Replacement Procedures
10.
Disconnect the drive data cables and power cable.
Figure 8-8
Disconnecting the drive cables from the system board
11.
Remove the drive cage and cable assembly from the computer.
12.
Remove the two Torx screws that secure the drive connector to the cage, remove the wires from
the slots in the cage, and then remove the drive connector from the cage.
Figure 8-9
Removing the connector
102
Chapter 8
Removal and Replacement Procedures