HP RP7 Maintenance & Service Guide HP RP7 Retail System Model 7800 - Page 90
Then rotate the top of the I/O cover up so that it snaps securely onto, the chassis
View all HP RP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
11. Replace the rear I/O cover by placing the hooks on the bottom of the cover into the slots on the bottom of the chassis (1). Then rotate the top of the I/O cover up so that it snaps securely onto the chassis (2). 12. Reconnect the power cord and press the power button. 80 Chapter 8 Removal and Replacement Procedures
11.
Replace the rear I/O cover by placing the hooks on the bottom of the cover into the slots on the
bottom of the chassis
(1)
. Then rotate the top of the I/O cover up so that it snaps securely onto
the chassis
(2)
.
12.
Reconnect the power cord and press the power button.
80
Chapter 8
Removal and Replacement Procedures