HP RP7 Maintenance & Service Guide HP RP7 Retail System Model 7800 - Page 113
Drive Cables and Bracket Assembly,
View all HP RP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
13. Remove the two Torx screws that secure the drive connector to the cage, remove the cable from the clip on the cage, and then remove the drive connector from the cage. Figure 8-10 Removing the drive connector To reinstall the drive cable and bracket assembly, reverse the removal procedure. Drive Cables and Bracket Assembly 103
13.
Remove the two Torx screws that secure the drive connector to the cage, remove the cable from
the clip on the cage, and then remove the drive connector from the cage.
Figure 8-10
Removing the drive connector
To reinstall the drive cable and bracket assembly, reverse the removal procedure.
Drive Cables and Bracket Assembly
103