HP RP7 Maintenance & Service Guide HP RP7 Retail System Model 7800 - Page 79
Optional HP Retail RP7 10.4 Customer Display, Snap the decorative panel onto the rear of the base.
View all HP RP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
8. Route the audio, DVI, USB, and power cables through the rear of the base and out the front of the base, then up through the cable retainer on the neck of the RP7 stand and connect the cables to the RP7 I/O ports. 9. Snap the decorative panel onto the rear of the base. Optional HP Retail RP7 10.4" Customer Display 69
8.
Route the audio, DVI, USB, and power cables through the rear of the base and out the front of
the base, then up through the cable retainer on the neck of the RP7 stand and connect the
cables to the RP7 I/O ports.
9.
Snap the decorative panel onto the rear of the base.
Optional HP Retail RP7 10.4” Customer Display
69