HP RP7 Maintenance & Service Guide HP RP7 Retail System Model 7800 - Page 62
Removal and Replacement Procedures, Reconnect the power cord and press the power button.
View all HP RP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
7. Replace the rear I/O cover by placing the hooks on the bottom of the cover into the slots on the bottom of the chassis (1). Then rotate the top of the I/O cover up so that it snaps securely onto the chassis (2). 8. Reconnect the power cord and press the power button. 52 Chapter 8 Removal and Replacement Procedures
7.
Replace the rear I/O cover by placing the hooks on the bottom of the cover into the slots on the
bottom of the chassis
(1)
. Then rotate the top of the I/O cover up so that it snaps securely onto
the chassis
(2)
.
8.
Reconnect the power cord and press the power button.
52
Chapter 8
Removal and Replacement Procedures