HP RP7 Maintenance & Service Guide HP RP7 Retail System Model 7800 - Page 89
Slide the VFD mounting bracket into the mounting hole on the rear of the RP7 base,
View all HP RP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
9. Slide the VFD mounting bracket into the mounting hole on the rear of the RP7 base (1), and install the two screws included with the VFD into the screw holes on top of the mounting bracket (2). 10. Replace the power supply cover by lowering it down over the neck of the base then sliding it back until it snaps in place. Optional HP Retail RP7 VFD Customer Display 79
9.
Slide the VFD mounting bracket into the mounting hole on the rear of the RP7 base
(1)
, and
install the two screws included with the VFD into the screw holes on top of the mounting bracket
(2)
.
10.
Replace the power supply cover by lowering it down over the neck of the base then sliding it
back until it snaps in place.
Optional HP Retail RP7 VFD Customer Display
79