HP StorageWorks 1606 HP StorageWorks Fabric OS 6.3.0 release notes (5697-0358, - Page 38

Web Tools functionality moved to DCFM The functionality that was moved from Web Tools in 6.1.1 to DCFM applies to all versions of DCFM and also applies to 6.3.x. Table 7 describes these changes. Table 7 Web Tools functionality in DCFM Function Web Tools 6.1.0 Add unzoned devices Zone Admin DCFM Configure > Zoning Reverse Find in the zoning dialog provides the view of the zoned and unzoned devices in the fabric if all zone members are selected for Find. Comments Analyze zone config Zone Admin Configure > Zoning: Reverse Find in the zoning dialog provides the view of the zoned and unzoned devices in the fabric if all zone members are selected for Find. Device Tree and Topology: Connected End Devices: Custom display from the top level in the main frame provides the device tree and topology view for all the zoned devices if all zones are selected in the active zone configuration. Define device alias Zone Admin Device accessibility matrix Zone Admin Configure > Zoning Configure > Zoning The Compare dialog provides the Storage-Host and Host-Storage view in a tree representation that is comparable to the Device Accessibility Matrix when all devices are selected. Fabric events Fabric summary Monitor > Fabric events Monitor > Logs > Events Monitor > Reports > Fabric Reports > Fabric summary Summary report FCIP tunnel configuration Port Admin Module > GigE tab Configure > FCIP tunnel Viewing FCIP tunnels is still supported in Web Tools 6.1.1, but New, Edit Config, and Delete are available only in DCFM. 38