HP StorageWorks 1606 HP StorageWorks Fabric OS 6.3.0 release notes (5697-0358, - Page 47
between the HP StorageWorks Encryption SAN Switch in the HA cluster
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Multiple repetitions of port enable/disable might result in a lost route Fixed in Fabric OS 6.3.0 in an HP StorageWorks 4/256 SAN Director configuration. "NO Comm" observed when remove HP VC switch from Bay 3 and installed in Bay 4 Fixed in Fabric OS 6.3.0 Channel receiving RSCN with missing ports in payload after HPF key Fixed in Fabric OS 6.3.0 on or off. Software verify error occurred during supportsave on HP StorageWorks Fixed in Fabric OS 6.3.0 DC SAN Backbone & DC04 SAN Directors. Discovered that a stable working encryption group had split after a successful I/O test run Fixed in Fabric OS 6.3.0 Detected termination of 0.weblinker.fcg on HP StorageWorks DC04 Fixed in Fabric OS 6.3.0 SAN Director. FOS v6.2.0 does not provide Chassisinfo with snmpv1 without adding Fixed in Fabric OS 6.3.0 and configuring an snmpv3 user. Missing FICON interrupt on HP StorageWorks DC04 SAN Director. Fixed in Fabric OS 6.3.0 Memory leak found during E-port processing. Fixed in Fabric OS 6.3.0 Calculation of TX port and Filter number can incorrectly corrupt the Filter Redirect RAM. Fixed in Fabric OS 6.3.0 Running configdefault may cause Kernel panic on HP StorageWorks Fixed in Fabric OS 6.3.0 4/256 SAN Director. Fixed in Fabric OS 6.3.0 High CPU load occurs and no commands can be run after CALD allocated shared memory is not released by applications. Workaround prior to code change: Run hafailover. Pending Merge: Repeatedly disconnect/reconnecting the ISL links between the HP StorageWorks Encryption SAN Switch in the HA cluster environment while rekey operations are in progress may cause data miscompare. Fixed in Fabric OS 6.3.0 Encryption group can't automatically recover after it is split into 2 dif- Fixed in Fabric OS 6.3.0 ferent islands. Firmwaredownload failed on HP StorageWorks DC SAN Director. Fixed in Fabric OS 6.3.0 Pending Merge: Host throughput drops 75% when rekey is started. Fixed in Fabric OS 6.3.0 All LUNs in a container are showing target offline. Fixed in Fabric OS 6.3.0 After encountering a rare error condition, a switch/director may fail Fixed in Fabric OS 6.3.0 to clear an interrupt, resulting in a persistently high CPU load. SNMP v3 user configuration reverts back to defaults after HAfailover. Fixed in Fabric OS 6.3.0 IFCC's when disabling trunks and having DPS enabled. Fixed in Fabric OS 6.3.0 Reset factory default using the faceplate pinhole caused FFDC and VCM shows "No Communication" to the switch Fixed in Fabric OS 6.3.0 HP StorageWorks Fabric OS 6.3.0 release notes 47