HP StorageWorks 1606 HP StorageWorks Fabric OS 6.3.0 release notes (5697-0358, - Page 63
FICON FCIP Acceleration error - FCCU LinkBusy from non-Busy CU
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Fruclass in fru table and fruhistoryclass in fruhistorytable of HA MIB shows other(1) for CP slot instead of cp(4) for DC SAN Director and DC04 SAN Director. Fixed in Fabric OS 6.3.0 CPstatus change trap is not generated on issuing HA failover for 4/256 SAN Director, but the failover happens and the CP status change oid Fixed in Fabric OS 6.3.0 returns changed values. FOS CLI doesn't allow Port fencing policy addition for F_Port when there are no F_ports on the switch. Fixed in Fabric OS 6.3.0 Workaround prior to code change: A. DCFM can be used to add the port fencing policy for F_Port. B. Existing FOS CLI can always be used to add port fencing policy after bringing up F_Port on a switch. Adding port fencing policy for F_Port makes sense only when there are F ports on a switch and anyway the existing CLI behaviour takes care of this. Not getting GbE ports while performing EnumerateAssociatedInstances Fixed in Fabric OS 6.3.0 on Brocade_LogicalSwitch. Switch doesn't commit after firmwareDownload fail as 0x23 (time out). Fixed in Fabric OS 6.3.0 Appropriate message is not shown in the message box, when the "Details" button in the "Service" tab of "HA" window is clicked. Fixed in Fabric OS 6.3.0 High Availability: The error message thrown is not relevant or meaningful, when the values for E_D_TOV and R_D_TOV in the "Configure" Fixed in Fabric OS 6.3.0 tab of "Switch admin", are changed. Incorrect output from agshow command. Fixed in Fabric OS 6.3.0 Detected termination of zoned observed running repeated multiple zone updates for several hours in different FIDs. Fixed in Fabric OS 6.3.0 FICON FCIP Acceleration error - FCCU LinkBusy from non-Busy CU in Fixed in Fabric OS 6.3.0 ReadStates. Found 2 LUNs got disabled with "Rekey done with failure" after overnight manual_rekey finished. [CVLC-1001], 775/57, SLOT 2 | FID 128, Nept_74, Manual re-key failed, LUN SN. Fixed in Fabric OS 6.3.0 Workaround prior to code change: Re-enable LUN. With Safezoning disabled, enabling defaultzoning via WT post concerning messages that Safezoning was disable and defaultzoning was Fixed in Fabric OS 6.3.0 enabled. If second FDISC comes in before the switch responds to the first FDISC between the same pair of devices, the Access Gateway daemon Fixed in Fabric OS 6.3.0 panics. In Web Tools, for Add operation in VLAN in CEE tab, all created data Fixed in Fabric OS 6.3.0 is not added in the table. FCAP works only in Non-VF mode or VF mode with Default Switch. Fixed in Fabric OS 6.3.0 Unexpected software call traceback error messages are being displayed on the console. Fixed in Fabric OS 6.3.0 HP StorageWorks Fabric OS 6.3.0 release notes 63