HP StorageWorks 1606 HP StorageWorks Fabric OS 6.3.0 release notes (5697-0358, - Page 52

Class 2 ACK is not forwarded from F_Port to N_Port in Access Gate

Get HP StorageWorks 1606 - Extension SAN Switch PDF manuals and user guides View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

4Gb SAN Switch for HP c-Class BladeSystem AG may login to DC SAN Director with wrong pwwn. Fixed in Fabric OS 6.3.0 Workaround prior to code change: Reboot AG. OpenVMS init command is not correctly supported. Fixed in Fabric OS 6.3.0 In FOS 6.2, OID for connUnitType no longer returns the correct access Fixed in Fabric OS 6.3.0 gateway mode status. System panic on stand by cp after a hafailover. Fixed in Fabric OS 6.3.0 Default Fabric Watch alarm value needs to be modified. Fixed in Fabric OS 6.3.0 Port fence disabled ports that are running diagtest and triggered blade Fixed in Fabric OS 6.3.0 fault during blade POST. Addressing mode NVP is not available in switch.html page. Fixed in Fabric OS 6.3.0 Class 2 ACK is not forwarded from F_Port to N_Port in Access Gate- Fixed in Fabric OS 6.3.0 way. MS Platform dB is activated after warm recovery of firmwaredownload. Fixed in Fabric OS 6.3.0 Inconsistencies seen for topologyshow and islshow bandwidth on 8/80 Fixed in Fabric OS 6.3.0 and 8/8 or 8/16 switches. FICON XRC Emulation error handling OOO Status Frames. Fixed in Fabric OS 6.3.0 Workaround prior to code change: Option 1: Deactivate all paths that utilize the same device ports and reactivate at the same time. Option 2: Disable FICON XRC emulation. HIL-1610 WARNING appeared on 8/40 switch units after power cycle. Fixed in Fabric OS 6.3.0 Workaround prior to code change: Ignore the warning - it is innocuous when seen right at boot up time. It results from a solitary spurious sensor reading that is below minimum. Temperature sensor reporting spurious solitary readings which leads to the CRITICAL HIL-1502 message, without having first gone through the HIL-1501 warning. Fixed in Fabric OS 6.3.0 Workaround prior to code change: Ignore isolated / spurious High Temperature CRITICAL errors when not preceeded by warnings. Unable to get F Ports(Trunk Ports) data. Fixed in Fabric OS 6.3.0 On some of 2408 FCoE Converged Network switches, DIAGPOST is Fixed in Fabric OS 6.3.0 failing due to loss of sync. Processor rebooted - Software Fault:ASSERT when frame size received Fixed in Fabric OS 6.3.0 is too big. 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
Reboot AG.
4Gb SAN Switch for HP c-Class BladeSystem AG may login to DC
SAN Director with wrong pwwn.
Fixed in Fabric OS 6.3.0
OpenVMS init command is not correctly supported.
Fixed in Fabric OS 6.3.0
In FOS 6.2, OID for connUnitType no longer returns the correct access
gateway mode status.
Fixed in Fabric OS 6.3.0
System panic on stand by cp after a hafailover.
Fixed in Fabric OS 6.3.0
Default Fabric Watch alarm value needs to be modified.
Fixed in Fabric OS 6.3.0
Port fence disabled ports that are running diagtest and triggered blade
fault during blade POST.
Fixed in Fabric OS 6.3.0
Addressing mode NVP is not available in switch.html page.
Fixed in Fabric OS 6.3.0
Class 2 ACK is not forwarded from F_Port to N_Port in Access Gate-
way.
Fixed in Fabric OS 6.3.0
MS Platform dB is activated after warm recovery of firmwaredownload.
Fixed in Fabric OS 6.3.0
Inconsistencies seen for topologyshow and islshow bandwidth on 8/80
and 8/8 or 8/16 switches.
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
Option 1: Deactivate all paths that
utilize the same device ports and
reactivate at the same time. Option
2: Disable FICON XRC emulation.
FICON XRC Emulation error handling OOO Status Frames.
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
Ignore the warning - it is innocuous
when seen right at boot up time. It
results from a solitary spurious sensor
reading that is below minimum.
HIL-1610 WARNING appeared on 8/40 switch units after power
cycle.
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
Ignore isolated / spurious High
Temperature CRITICAL errors when
not preceeded by warnings.
Temperature sensor reporting spurious solitary readings which leads
to the CRITICAL HIL-1502 message, without having first gone through
the HIL-1501 warning.
Fixed in Fabric OS 6.3.0
Unable to get F Ports(Trunk Ports) data.
Fixed in Fabric OS 6.3.0
On some of 2408 FCoE Converged Network switches, DIAGPOST is
failing due to loss of sync.
Fixed in Fabric OS 6.3.0
Processor rebooted - Software Fault:ASSERT when frame size received
is too big.
52