HP dx2290 Service Reference Guide - HP Compaq dx2290 Business PC - Page 50
Removing the memory card reader
View all HP dx2290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Removing the memory card reader 1. Prepare the computer for disassembly (Preparation for Disassembly on page 26). 2. Remove the access panel (Access Panel on page 28). 3. Remove the front bezel (Front Bezel on page 29). 4. Release the drive by removing the screw on the side of the memory card reader, sliding the reader to the left to loosen it, and then pulling the memory card reader part way out of the front of the chassis. 5. Disconnect the cable from the back of the memory card reader and if necessary remove the cable from the clip on the side of the hard drive cage. 6. Pull the memory card reader out of the front of the chassis. To replace the memory card reader, reverse the removal procedures. If the cable was routed through a clip on the hard drive cage, be sure to reroute the cable through this clip when installing the memory card reader. 42 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis