HP dx2290 Service Reference Guide - HP Compaq dx2290 Business PC - Page 66
Type 3 Battery Holder
View all HP dx2290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Type 3 Battery Holder 1. Pull back on the clip (1) that holds the battery in place, then remove the battery (2). 2. Insert the new battery and position the clip back in place. 3. Replace the computer access panel. 4. Plug in the computer and turn on power to the computer. 5. Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to the Computer Setup (F10) Utility Guide. 58 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
Type 3 Battery Holder
1.
Pull back on the clip (1) that holds the battery in place, then remove the battery (2).
2.
Insert the new battery and position the clip back in place.
3.
Replace the computer access panel.
4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time, your passwords, and any special system setups, using Computer Setup.
Refer to the
Computer Setup (F10) Utility Guide
.
58
Chapter 6
Removal and Replacement Procedures Microtower (MT) Chassis