HP dx6120 HP Business Desktop dx6100 Series Personal Computers Service Referen - Page 157
Power Switch Assembly
View all HP dx6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Removal and Replacement Procedures- Slim Tower (ST) Chassis 7.14 Power Switch Assembly 1. Prepare the computer for disassembly (Section 7.1, "Preparation for Disassembly"). 2. Remove the computer cover (Section 7.5, "Computer Cover"). 3. Disconnect the power switch/LED cable from the system board. 4. Squeeze the switch holder retaining clips together at the front of the chassis 1 and push the switch assembly out of the chassis 2. Push the two LEDs out of the chassis 3. 5. If necessary, the LED holders may also be removed by squeezing the clips and pushing them out of the front of the chassis 4. To install the power switch and LEDs, reverse the removal procedure. Service Reference Guide, dx6100 361293-003 7-39
Service Reference Guide, dx6100
361293-003
7–39
Removal and Replacement Procedures— Slim Tower (ST) Chassis
7.14 Power Switch Assembly
1. Prepare the computer for disassembly (
Section 7.1, “Preparation for Disassembly”
).
2. Remove the computer cover (
Section 7.5, “Computer Cover”
).
3. Disconnect the power switch/LED cable from the system board.
4. Squeeze the switch holder retaining clips together at the front of the chassis
1
and push the
switch assembly out of the chassis
2
. Push the two LEDs out of the chassis
3
.
5.
If necessary, the LED holders may also be removed by squeezing the clips and pushing them
out of the front of the chassis
4
.
To install the power switch and LEDs, reverse the removal procedure.