HP dx6120 HP Business Desktop dx6100 Series Personal Computers Service Referen - Page 170
Backwall, Preparation for Disassembly, Computer Cover, Vertically Oriented
View all HP dx6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Removal and Replacement Procedures- Slim Tower (ST) Chassis 7.21 Backwall 1. Prepare the computer for disassembly (Section 7.1, "Preparation for Disassembly"). 2. Remove the computer cover (Section 7.5, "Computer Cover"). 3. Remove all PCI and PCI Express expansion boards (Section 7.9, "Vertically Oriented Expansion Card"). 4. Press down on the green latch located on the front of the chassis next to the drives 1. This disengages the drive cage. 5. Slide the drive cage forward until it stops 2. ✎ It is not necessary to remove any drives from the drive cage. The drive cage is moved only to gain working room. 6. Remove the power supply from the chassis (Section 7.18, "Power Supply"). 7. Disconnect all data and power cables from the system board except the cable to the heatsink. 7-52 361293-003 Service Reference Guide, dx6100