HP dx6120 HP Business Desktop dx6100 Series Personal Computers Service Referen - Page 75
Preventing Electrostatic Damage to Equipment, 5.2.3 Personal Grounding Methods and Equipment
View all HP dx6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Identifying the Chassis, Routine Care, and Disassembly Preparation ■ Static electricity increases as humidity decreases. Relative Humidity Event 55% 40% 10% Walking across carpet Walking across vinyl floor Motions of bench worker Removing DIPs* from plastic tube 7,500 V 3,000 V 400 V 400 V 15,000 V 5,000 V 800 V 700 V 35,000 V 12,000 V 6,000 V 2,000 V Removing DIPs* from vinyl tray Removing DIPs* from Styrofoam Removing bubble pack from PCB Packing PCBs in foam-lined box 2,000 V 3,500 V 7,000 V 5,000 V 4,000 V 5,000 V 20,000 V 11,000 V 11,500 V 14,500 V 26,500 V 21,000 V *These are then multi-packaged inside plastic tubes, trays, or Styrofoam. ✎ 700 volts can degrade a product. 5.2.2 Preventing Electrostatic Damage to Equipment Many electronic components are sensitive to ESD. Circuitry design and structure determine the degree of sensitivity. The following packaging and grounding precautions are necessary to prevent damage to electric components and accessories. ■ To avoid hand contact, transport products in static-safe containers such as tubes, bags, or boxes. ■ Protect all electrostatic parts and assemblies with conductive or approved containers or packaging. ■ Keep electrostatic sensitive parts in their containers until they arrive at static-free stations. ■ Place items on a grounded surface before removing them from their container. ■ Always be properly grounded when touching a sensitive component or assembly. ■ Avoid contact with pins, leads, or circuitry. ■ Place reusable electrostatic-sensitive parts from assemblies in protective packaging or conductive foam. 5.2.3 Personal Grounding Methods and Equipment Use the following equipment to prevent static electricity damage to equipment: ■ Wrist straps are flexible straps with a maximum of one-megohm ± 10% resistance in the ground cords. To provide proper ground, a strap must be worn snug against bare skin. The ground cord must be connected and fit snugly into the banana plug connector on the grounding mat or workstation. Service Reference Guide, dx6100 361293-003 5-3