HP dx6120 HP Business Desktop dx6100 Series Personal Computers Service Referen - Page 173
the system board.
View all HP dx6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Removal and Replacement Procedures- Slim Tower (ST) Chassis 13. Slide the new backwall 1 onto the rear chassis. Secure it with the three screws 2 removed from the old backwall. 14. Install the serial connector 1 into the new backwall using the two screws 2 that were removed from the serial connector in a previous step. Reconnect the "Serial A" cable 3 to the system board. 15. Install the system board tray assembly. Be sure the keyhole slot on the system board sits properly over the locking pins. When the system board is in position, replace the long screw to secure the system board to the chassis. Service Reference Guide, dx6100 361293-003 7-55
Service Reference Guide, dx6100
361293-003
7–55
Removal and Replacement Procedures— Slim Tower (ST) Chassis
13. Slide the new backwall
1
onto the rear chassis. Secure it with the three screws
2
removed
from the old backwall.
14. Install the serial connector
1
into the new backwall using the two screws
2
that were
removed from the serial connector in a previous step. Reconnect the “Serial A” cable
3
to
the system board.
15. Install the system board tray assembly. Be sure the keyhole slot on the system board sits
properly over the locking pins. When the system board is in position, replace the long screw
to secure the system board to the chassis.