HP dx6120 HP Business Desktop dx6100 Series Personal Computers Service Referen - Page 168
Complete the installation of the system board by reconnecting all cables.
View all HP dx6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Removal and Replacement Procedures- Slim Tower (ST) Chassis 2. Install the processor. Ä CAUTION: Before installing a previously used heatsink you must clean the top of the procesor and the bottom of the heatsink with the alcohol pad supplied in the spares kit. After the alcohol has evaporated, apply thermal grease to the top of the processor using the syringe in the spares kit. 3. Attach the heatsink to the system board-standoff assembly with the four caprive screws. Ä CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (as in an X) to evenly seat the heatsink on the processor. This is especially important as the pins on the socket are very fragile and any damage to them may require replacing the system board. 4. Reinstall the system board assembly into the chassis and secure it with the long mounting screw. Ä CAUTION: When reconnecting the cables it is important that they be positioned so they do not interfere with the sliding of the drive cage the rotation of the power supply Complete the installation of the system board by reconnecting all cables. 7-50 361293-003 Service Reference Guide, dx6100