Husqvarna 562 XP G Workshop Manual - Page 36
E. See figure 34.
View all Husqvarna 562 XP G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Repair Instructions Dismantling the carburettor 1 Dismantle the cylinder cover and the air filter. 2 Loosen the screws, F. Unhook the rubber attachment G on both sides. See Figure 35. 3 Loosen the suction hose A, the return hose B, and the tank bleeding hose C. See figure 34. Fig 34 4 Remove the air filter holder. Let the air filter holder remain in place in the cabling for the stop button. Loosen the fuel hose, D. Unhook the throttle cable, E. See figure 34. 5 NOTE! Press down the lug to release the carburettor. Lift out the carburettor. See figure 36. Fig 35 NOTE! The lug on the carburettor is securely attached to the partition wall. D E Fig 36 6 Use a small flat screwdriver to snap open the connector from the black attachment. Separate the connector by pressing down the catch with a flat screwdriver and then pulling the unit apart. See figure 37. 36 - English Fig 37