Husqvarna 562 XP G Workshop Manual - Page 45
Dismantling the piston and cylinder
View all Husqvarna 562 XP G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
7.21 Dismantling the piston and cylinder 1 Dismantle: • The cylinder cover • The carburettor (see "Dismantling the carburettor") • The muffler • The vibration element • The spark plug cap • The intake system 2 Unscrew the cylinder's four screws and carefully lift away the cylinder and the gasket. SeeNfOigTuEre! 60. Take care to prevent any dirt and foreign particles from entering the crankcase. Fig 60 3 Cover over the crankcase opening. 4 Remove the circlips for the gudgeon pin and press out the gudgeon pin. The lift off the piston. See figure 61. 5 Remove the gudgeon pin bearing (the needle bearing) using a pliers. See figure 61. Replace with a new bearing. Fig 61 Cleaning and inspection of the cylinder Clean all components, scrape off all gasket remains and soot from the following areas: • The piston crown • The top of the cylinder bore (inside) • The cylinder exhaust port • The base of the cylinder and/or crankcase Repair Instructions English - 45