IBM 2621483 User Guide - Page 72
If you want to install two DIMMs, repeat these steps.
UPC - 087944548195
View all IBM 2621483 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Increasing Memory 4. Install the DIMM into the memory slot. Note: To avoid damaging the DIMM, do not touch its contact edge. a. Find the notch on the side of the DIMM. b. With the notched end of the DIMM toward the right side of the socket, insert the DIMM, at an angle or approximately 20°, into the socket; then press it firmly (1). c. Pivot the DIMM until it snaps into place (2). If you want to install two DIMMs, repeat these steps. 1 2 5. Replace the memory slot cover over the memory slot, aligning the back side of the cover first as shown; then tighten the screws. 6. Replace the battery pack. 7. Turn the computer over again, power on the computer. 56 ThinkPad i Series 1400/1500 User's Reference
Increasing Memory
4. Install the DIMM into the memory slot.
Note:
To avoid damaging the DIMM, do not touch its contact
edge.
a. Find the notch on the side of the DIMM.
b. With the notched end of the DIMM toward the right side of
the socket, insert the DIMM, at an angle or approximately
20°, into the socket; then press it firmly (1).
c. Pivot the DIMM until it snaps into place (2).
If you want to install two DIMMs, repeat these steps.
1
2
5. Replace the memory slot cover over the memory slot, aligning
the back side of the cover first as shown; then tighten the
screws.
6. Replace the battery pack.
7. Turn the computer over again, power on the computer.
56
ThinkPad i Series 1400/1500 User's Reference