IBM 79856au Installation Guide - Page 72
error, codes
UPC - 883436004374
View all IBM 79856au manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Other beep codes See the Problem Determination and Service Guide on the IBM System x Documentation CD for information about other beep codes. POST error codes The following table provides an abbreviated list of the error codes that might appear during POST. See the Problem Determination and Service Guide on the IBM System x Documentation CD for more information about the POST error codes. To check for updated technical information, go to http://www.ibm.com/servers/eserver/ support/xseries/index.html, select System x3655 and click Go; then, click the Install and use tab, and click Product documentation. Table 3. Abbreviated list of POST error messages POST message Failing device or problem found Suggested action 101, 102 Tick timer internal interrupt, internal timer channel 2 1. Reseat the system board. 2. (Trained service technician only) Replace the system board. 151 Real-time clock error. 1. Reseat the battery. 2. Replace the following components one at a time, in the order shown, restarting the server each time: a. System-board battery b. (Trained service technician only) System board 162 Device configuration 1. Run the Configuration/Setup Utility program, error. select Load Default Settings, and save the settings. 2. Reseat the following components one at a time, in the order shown, restarting the server each time: a. Battery b. Failing device c. (Trained service technician only) System board 163 Real-time clock error. 1. Run the Configuration/Setup Utility program, select Load Default Settings, make sure the date and time are correct, and save the settings. 2. Reseat the battery. 3. Replace the following components one at a time, in the order shown, restarting the server each time: a. Battery b. (Trained service technician only) System board 58 IBM System x3655 Type 7985: Installation Guide