IBM 79856au Installation Guide - Page 76
General, problems, drive
UPC - 883436004374
View all IBM 79856au manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
General problems v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See the parts listing in the Problem Determination and Service Guide to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Symptom Action A cover lock is broken, an LED If the part is a CRU, replace it. If the part is a FRU, the part must be replaced by a is not working, or a similar trained service technician. problem has occurred. Hard disk drive problems v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See the parts listing in the Problem Determination and Service Guide to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Symptom Action Not all drives are recognized by Remove the drive that is indicated by the diagnostic tests; then, run the hard disk the hard disk drive diagnostic drive diagnostic test again. If the remaining drives are recognized, replace the drive test (the Fixed Disk test). that you removed with a new one. The server stops responding during the hard disk drive diagnostic test. Remove the hard disk drive that was being tested when the server stopped responding, and run the diagnostic test again. If the hard disk drive diagnostic test runs successfully, replace the drive that you removed with a new one. A hard disk drive was not detected while the operating system was being started. Reseat all hard disk drives and cables; then, run the hard disk drive diagnostic tests again. A hard disk drive passes the diagnostic Fixed Disk Test but the problem remains. Run the diagnostic SCSI Fixed Disk Test (see"Running the diagnostic programs" in the Problem Determination and Service Guide). 62 IBM System x3655 Type 7985: Installation Guide