Icom IC-M424G Instruction Manual - Page 14
Function display
View all Icom IC-M424G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2 PANEL DESCRIPTION ■■Function display q w er t yu i o !7 !6 !0 !5 !1 !4 !2 !3 q BUSY/TRANSMIT ICON (p. 12 is displayed when receiving a signal or when the squelch is open is displayed while transmitting. w POWER ICON (p. 12) ➥➥ "25W" is displayed when high power is selected. ➥➥ "1W" is displayed when low power is selected. e CHANNEL GROUP ICON (p. 10) Shows which channel group is selected, INT, USA, CAN, ATIS or DSC, depending on the version. ➥➥ WX is displayed when the weather channel is select- ed.* *For only U.S.A. and Australian version transceivers. 4 r CALL CHANNEL ICON (p. 9) Displayed when the Call channel is selected. t DUPLEX ICON (p. 10) Displayed when a duplex channel is selected. y FAVORITE CHANNEL ICON (p. 17) Displayed when a Favorite (Tag) channel is selected. u MESSAGE ICON (p. 60) Blinks when there is an unread DSC message. i GPS ICON ➥➥ Stays ON when the built-in GPS receiver* or an external GPS receiver is receiving valid position data. *For only IC-M323G and IC-M324G. ➥➥ Blinks when searching for valid position data. o SWITCH ICON (p. 63) Displayed when the "CH 16 SWITCH" in DSC Settings is set to OFF. !0 LOW BATTERY ICON Blinks when the battery voltage drops to approximately 10 V DC or less. !1 CHANNEL NUMBER READOUT Shows the selected operating channel number. • When a simplex channel is selected, "A" is displayed. !2 CHANNEL NAME FIELD The channel name is displayed, if entered. (p. 13)