Icom IC-M424G Instruction Manual - Page 32
Entering, position and time
View all Icom IC-M424G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
7 DSC OPERATION ■■Entering position and time A Distress call should include the ship's position and time. If no GPS receiver is connected and built-in GPS receiver* is not receiving valid position data, your position and UTC (Universal Time Coordinated) time should be manually entered. They are automatically included when a GPS receiver compatible with the NMEA 0183 (ver. 2.0 or later) format is connected. *For only IC-M323G and IC-M324G. • Manual entry is disabled when a GPS receiver is connected. • Manually entered position and time will be held for only 23.5 hours. qqEnter "POSITION INPUT" in the DSC SETTINGS menu. MENU ➪ DSC Settings ➪ Position Input (Push [MENU].) (Rotate Dial, then push [ENT].) wwEnter your latitude and longitude position using Dial, and [Y]/[Z Select a desired number using Dial, or [Y]/[Z Push [ENT] or Dial to set it. • T o move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. • Select N (North latitude) or S (South latitude) when the cursor is on the 'N' or 'S' position. • Select W (West longitude) or E (East longitude) when the cursor is on the 'W' or 'E' position. 22 • Push [EXIT] to return to the normal operating mode. • Push [BACK] to return to the previous screen. eeAfter entering the position, push [ENT] to save it. rrThe UTC time entry screen is displayed, enter the UTC time in the following way: • Select a desired number using Dial, or [Y]/[Z Push [ENT] or Dial to set it. • T o move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. ttPush [ENT] or Dial to save your position and time. • Return to the "DSC SETTINGS" screen.