Icom IC-M424G Instruction Manual - Page 48
Push [CALL] to make a Position Report Call.
View all Icom IC-M424G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
7 DSC OPERATION ■ Making DSC calls DD Making a Position Report call (continued) rrPush [CALL] to make a Position Report Call. • If Channel 70 is busy, the transceiver stands by until the channel becomes clear. When no GPS receiver is connected and built-in GPS receiver* is not receiving valid position data, and both position and time have been manually entered, the screen as shown below is displayed. Edit your latitude and longitude position and UTC time as follows: *For only IC-M323G and IC-M324G. ttAfter the Position Report Call has been transmitted, the transceiver automatically returns to the normal operating mode. ➥➥Push [CHG], then edit your latitude and longitude position and UTC time. • Select a desired number using Dial, or [Y]/[Z Push [ENT] or Dial to set it. • T o move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. • S elect N (North latitude) or S (South latitude) when the cursor is on the 'N' or 'S' position. • S elect W (West longitude) or E (East longitude) when the cursor is on the 'W' or 'E' position. 38