Icom IC-M424G Instruction Manual - Page 69
Transmitted Call log, Receiving a Test Acknowledgement Call
View all Icom IC-M424G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
DSC OPERATION 7 DDReceiving a Test Acknowledgement Call When a Test Acknowledgement Call is received: ➥➥The alarm sounds for 2 minutes. ➥➥"RCVD TEST ACK" is displayed. The backlight blinks for 2 minutes. qqPush [ALARM OFF] to stop the alarm and the blinking backlight. • Even if you do not push [ALARM OFF], the alarm stops after 2 minutes, and then the screen in step w is displayed. wwPush a softkey to select your desired action. [EXIT] ➥➥ Push to return to the normal operating mode. • The transceiver exits the DSC mode. • " " continues to blink and the Call is stored in the Received Call Log. ■■Transmitted Call log 1 The transceiver automatically stores up to 50 transmitted 2 calls, and the logs can be used as a supplement to your log- 3 book. 4 qqEnter "TX CALL LOG" in the DSC CALLS menu. 5 MENU ➪ DSC Calls ➪ Transmitted Call Log (Push [MENU].) (Rotate Dial, then push [ENT].) 6 7 wwPush [Y]/[Z] to select the desired item, then push [ENT]. • Push [BACK] to return to the previous screen. 8 • Push [EXIT] to return to the normal operating mode. 9 10 11 eeRotate Dial to scroll the DSC message contents. 12 13 Rotate 14 15 16 rrTo delete the displayed DSC message, push [DEL]. • The confirmation screen is displayed, then push [OK] to delete. ttPush [EXIT] to return to the normal operating mode. 59