Icom IC-M424G Instruction Manual - Page 24
Entering a Call channel data, Microphone Lock function
View all Icom IC-M424G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4 BASIC OPERATION ■■Entering a Call channel data You can enter data in Call channel in each channel group for quick recall. qqSelect the desired channel group (INT, USA, CAN, ATIS, or DSC) to be entered. (p. 10) wwHold down [16/C] for 1 second to select the Call channel of the selected channel group. • "CALL" and the Call channel number is displayed. eeHold down [16/C] again for 3 seconds (until a long beep changes to 2 short beeps) to enter the Call channel entry mode. rrRotate Dial or push to select a channel. ■■Microphone Lock function The Microphone Lock function electrically locks and the [HI/LO] keys on the supplied microphone. This prevents accidental channel changes and function access. ➥➥While holding down [HI/LO] on the microphone, hold down [PWR](Dial) to turn ON the transceiver and turn the Microphone Lock function ON or OFF. ttPush [ENT] to save the displayed channel as the Call channel. • Push [CLEAR] to cancel. [Y]/[Z] [HI/LO] 14