Icom IC-M424G Instruction Manual - Page 52
Push [ALARM OFF] to stop the alarm, and then the screen
View all Icom IC-M424G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
7 DSC OPERATION ■ Making DSC calls DD Making a Test call (continued) rrPush [CALL] to make a Test call. • If Channel 70 is busy, the transceiver stands by until the channel becomes clear. uuPush [ALARM OFF] to stop the alarm, and then the screen as shown below is displayed. ttAfter the Test call has been transmitted, the following screen is displayed. iiPush [EXIT] to return to the normal operating mode. yyWhen the acknowledgement call is received, alarm sounds and the following screen is displayed. 42
42
7
DSC OPERATION
■
Making DSC calls
Making a Test call (continued)
D
Push [CALL] to make a Test call.
r
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the Test call has been transmitted, the following
t
screen is displayed.
When the acknowledgement call is received, alarm sounds
y
and the following screen is displayed.
Push [ALARM OFF] to stop the alarm, and then the screen
u
as shown below is displayed.
Push [EXIT] to return to the normal operating mode.
i