Icom IC-M424G Instruction Manual - Page 35
shown below is displayed. Edit your latitude and longitude, position and UTC time as follows
View all Icom IC-M424G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
DSC OPERATION 7 ttAfter transmitting the call, the transceiver waits for an acknowledgment call. • T he Distress call is automatically transmitted every 3.5 to 4.5 minutes, until an acknowledgement is received ('Call repeat' mode), or DSC cancel call is made (p. 26). • Push [RESEND] to manually transmit the Distress repeat call. • Push then push [INFO] to display the transmitted Distress call information. • Push then push [PAUSE] to pause the 'Call repeat' mode, push [RESUME] to resume it. yyAfter receiving an acknowledgment call, push [ALARM OFF] then reply using the microphone. ➥➥A distress alert contains: • Nature of distress: Selected in step w. • Position information: The latest GPS or manually entered position is held for 23.5 hours, or until the power is turned OFF. When no GPS receiver is connected and built-in GPS re- 1 ceiver* is not receiving valid position data, and both posi- 2 tion and time have been manually entered, the screen as shown below is displayed. Edit your latitude and longitude 3 position and UTC time as follows: *For only IC-M323G and IC-M324G. 4 5 6 7 8 ➥➥Push [CHG], then edit your latitude and longitude posi- 9 tion and UTC time. • Select a desired number using Dial, or [Y]/[Z 10 • Push [ENT] or Dial to set it. 11 • T o move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. 12 • Select N (North latitude) or S (South latitude) when the cursor is on the 'N' or 'S' position. 13 • Select W (West longitude) or E (East longitude) when the cur- 14 sor is on the 'W' or 'E' position. 15 16 25