Icom IC-M424G Instruction Manual - Page 68
Receiving a Polling Request call/Test Call
View all Icom IC-M424G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
7 DSC OPERATION ■ Receiving DSC calls (Continued) DDReceiving a Polling Request call/Test Call [Example]: Receiving a Polling Request call. When a Polling Request call is received: ➥➥The alarm sounds for 2 minutes. ➥➥"RCVD POLLING REQUEST" is displayed. The backlight blinks for 2 minutes. qqPush [ALARM OFF] to stop the alarm and the blinking backlight. • Even if you do not push [ALARM OFF], the alarm stops after 2 minutes, and then the screen in step w is displayed. [IGN] ➥➥ Push to ignore the Call and return to the normal operat- ing mode. • The transceiver exits the DSC mode. • " " continues to blink and the Call is stored in the Received Call Log. [INFO] ➥➥ Push to display the Received call information. (p. 60) [ACK] ➥➥ Push to display the "POLLING REPLY" screen to reply to the Call. (p. 50) wwPush a softkey to select your desired action. When "POSITION ACK" or "TEST ACK" is set to "Auto TX," the transceiver automatically replies to the Call. In that case, both the TX and RX calls are stored in the Transmitted and Received Call Logs. 58