Icom IC-M424G Instruction Manual - Page 66
Receiving a Position Request Call
View all Icom IC-M424G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
7 DSC OPERATION ■ Receiving DSC calls (Continued) DDReceiving a Position Request Call When a Position Request Call is received: ➥➥The alarm sounds for 2 minutes. ➥➥"RCVD POS REQUEST" is displayed. The backlight blinks for 2 minutes. qqPush [ALARM OFF] to stop the alarm and the blinking backlight. • Even if you do not push [ALARM OFF], the alarm stops after 2 minutes, and then the screen in step w is displayed. [IGN] ➥➥ Push to ignore the Call and return to the normal operat- ing mode. • The transceiver exits the DSC mode. • " " continues to blink and the Call is stored in the Received Call Log. [INFO] ➥➥ Push to display the Received call information. (p. 60) [ACK] ➥➥ Push to display the "POSITION REPLY" screen and send a reply to the Call. (p. 45) wwPush a softkey to select your desired action. When "POSITION ACK" is set to "Auto TX," the transceiver automatically replies to the Call. In that case, both the TX and RX calls are stored in the Transmitted and Received Call Logs. 56