Icom IC-M424G Instruction Manual - Page 89

MB-132 installation

Get Icom IC-M424G PDF manuals and user guides View all Icom IC-M424G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

9 CONNECTIONS AND MAINTENANCE ■■MB-132 installation An optional MB-132 flush mount is available for mounting the transceiver to a flat surface, such as an instrument panel. KEEP the transceiver and microphone at least 1 meter away from your vessel's magnetic navigation compass. qqUsing the template on page 85, carefully cut a hole into the instrument panel, or wherever you plan to mount the transceiver. wwSlide the transceiver through the hole, as shown below. 1 eeAttach the clamps on either side of the transceiver with 2 2 M5 × 8 mm supplied bolts. 3 • Make sure that the clamps align parallel to the transceiver body. 4 5 6 7 8 9 rrTighten the end bolts on the clamps (clockwise) so that the 10 clamps press firmly against the inside of the instrument control panel. 11 ttTighten the locking nuts (counterclockwise) so that the 12 transceiver is securely mounted in position, as shown be- low. 13 yyConnect the antenna and power cable, then return the instrument control panel to its original place. 14 15 16 t r 79

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
79
9
CONNECTIONS AND MAINTENANCE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
MB-132 installation
An optional MB-132 flush mount is available for mounting the
transceiver to a flat surface, such as an instrument panel.
KEEP
the transceiver and microphone at least 1 meter
away from your vessel’s magnetic navigation compass.
Using the template on page 85, carefully cut a hole into
q
the instrument panel, or wherever you plan to mount the
transceiver.
Slide the transceiver through the hole, as shown below.
w
Attach the clamps on either side of the transceiver with 2
e
M5 × 8 mm supplied bolts.
• Make sure that the clamps align parallel to the transceiver body.
Tighten the end bolts on the clamps (clockwise) so that the
r
clamps press firmly against the inside of the instrument
control panel.
Tighten the locking nuts (counterclockwise) so that the
t
transceiver is securely mounted in position, as shown be-
low.
Connect the antenna and power cable, then return the in-
y
strument control panel to its original place.
r
t