Intermec PF4i PF2i and PF4i Mid-Range Printer User's Manual
Intermec PF4i Manual
View all Intermec PF4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Intermec PF4i manual content summary:
- Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 1
PF2i | PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 2
both that copyright notice and this permission notice appear in supporting documentation. Dr John Maddock makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty. ii PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 3
dpi support • New keypad • Ethernet interface • Monotype font support • Multiple network interfaces • Multiple firmware support • IPv6 functionality • Multiple NET connections Revised P/N 1-960585-02 to 934-031-001. Bring into Adobe FrameMaker 8.0. PF2i and PF4i Mid-Range Printer User's Manual iii - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 4
on Intermec Ready-To-Work Indicator added. New method for returning to factory default added. More bar codes supported. Revised to support IPL v2.10. Information about EasyLAN Wireless interface added. Supports original IPL version (v2.00). iv PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 5
14 Loading Media for Peel-Off Printing 16 Loading Media for Cut-Off Printing (PF4i Only 24 Loading Media From an External Supply 30 Loading Ribbon 30 Printing a Test Label 36 Creating and Printing Labels 39 Printing on RFID Media (PF2i Only 39 PF2i and PF4i Mid-Range Printer User's Manual v - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 6
Configuring 802.1x Settings 84 Configuring Your Printer With PrintSet 86 Configuring Your Printer With Commands Sent From Your PC 86 Configuring Your Printer Using SmartSystems Foundation 87 Configuring Your Printer Using Wavelink Avalanche 88 vi PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 7
Product Support 94 Understanding Error Messages 95 Troubleshooting Printer Problems and Finding Solutions 99 Resetting the Printer 104 Adjusting the Printer 105 Adjusting the Pressure Arm 106 Adjusting the Label Stop Sensor 107 Adjusting the Printhead Pressure 111 Adjusting the Ribbon Break - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 8
Page 166 Web Style Guide Files 167 Content of a Web Style Guide File 167 Required Environment Variables 167 Optional Environment Variables 168 x-www-url-Encoding Syntax Rules 169 Memory and Storage 170 Creating a Web Style Guide File 170 viii PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 9
Contents I Index 171 PF2i and PF4i Mid-Range Printer User's Manual ix - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 10
Contents x PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 11
support information, and sources for additional product information. Safety Information Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Intermec equipment you are servicing. PF2i and PF4i Mid-Range Printer User's Manual xi - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 12
. To search for your local representative, from the Intermec website, click About Us > Contact Us. Who Should Read This Manual This manual is for the person who is responsible for installing, configuring, and maintaining the PF2i and PF4i. xii PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 13
> PF2i. 4 Click the Manuals tab. 5 If your product does not have its own product page, click Support > Manuals. Use the Product Category field, the Product Family field, and the Product field to help you locate the documentation for your product. PF2i and PF4i Mid-Range Printer User's Manual xiii - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 14
Before You Begin xiv PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 15
1 Using the Printer Use this chapter to familiarize yourself with the PF2i and PF4i printers. This chapter contains these sections: • Learning About the Printer • Loading Media • Loading Ribbon • Printing a Test Label • Creating and Printing Labels • Printing on RFID Media (PF2i Only) 1 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 16
are referred to as "printer" unless otherwise noted. Identifying the Parts of the Printer Use this section to familiarize yourself with the parts of the printer. LEDs Screen Keypad Print button Front door Print mechanism Front View Media cover 2 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 17
that interprets ZPL II or later programs. To setup, configure, and use ZSim, see the ZSim Programmer's Guide. DSim DSim is a Datamax™ simulation program that runs Datamax programs. To setup, configure, and use DSim, see the DSim Programmer's Guide. PF2i and PF4i Mid-Range Printer User's Manual 3 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 18
T. 2 Enter the Fingerprint password: 8311. 3 Press E. 4 Go to SETUP > PRINT DEFS > CMD LANGUAGE. You can also change the printer language from the printer's home page. For help, see "Configuring Your Printer From the Printer Home Page" on page 64. 4 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 19
a Testfeed (feed a blank label and adjust the media feed). I Display error messages, Ready-to-Work status, and communication channel information. L or R After you press I, use these buttons to scroll through error and information messages. PF2i and PF4i Mid-Range Printer User's Manual 5 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 20
page 94. Understanding the Screen The screen provides background illumination and displays two lines of text, each with 16 characters. The screen displays error messages, as well as useful information when you start, setup, and upgrade your printer. 6 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 21
you use to load media depends on how you want the printer to operate. The printer can print in these modes: • Tear-off (straight-through) • Tear-off with Quick-Load (straight-through) • Cut-off (PF4i only) • Peel-off (self-strip) • External supply PF2i and PF4i Mid-Range Printer User's Manual 7 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 22
(mark stock), with or without perforations You can also install an optional label taken sensor so that the next copy in the batch is not printed until the current copy is removed. For more information, see "Accessories for the Printer" on page 145. 8 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 23
To load media for tear-off printing 1 Open the media cover. Chapter 1 - Using the Printer 2 To raise the printhead, turn the printhead lift lever clockwise. PF2i and PF4i Mid-Range Printer User's Manual 9 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 24
Chapter 1 - Using the Printer 3 Remove any empty core from the media supply hub. 3 2 1 4 4 Fit a new roll of media on the supply hub. Adjust the edge guide so the roll becomes flush with the center section. 3 2 1 4 10 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 25
Chapter 1 - Using the Printer 5 Route the media through the print mechanism and push it toward the center section as far as it goes. bw fw Route the Media Media Path PF2i and PF4i Mid-Range Printer User's Manual 11 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 26
Chapter 1 - Using the Printer 6 To lower the printhead, turn the printhead lift lever counterclockwise. 7 Adjust the position of the green edge guide so the media is guided with a minimum of play. 12 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 27
8 Close the media cover. Chapter 1 - Using the Printer 9 Press the Print button to advance the media and adjust the media feed. Tear off the media by pulling it downwards. PF2i and PF4i Mid-Range Printer User's Manual 13 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 28
your Intermec representative. For help installing the Quick-Load guides, see "Installing Quick-Load Guides" on page 112. To load tear-off media with quick-load guides 1 Open the media cover. 2 Remove any empty core from the media supply roll post. 3 2 1 4 14 PF2i and PF4i Mid-Range Printer User - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 29
Chapter 1 - Using the Printer 3 Fit a new roll of media on the supply post. Adjust the edge guide so the roll becomes flush with the center section. 3 2 1 4 4 If necessary, adjust the outer quick-load guide to fit the width of the media. PF2i and PF4i Mid-Range Printer User's Manual 15 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 30
a label length of less than 25 mm (1 in). You can also install an optional label taken sensor so that the next copy in the batch is not printed until the current copy is removed. For more information, see "Accessories for the Printer" on page 145. 16 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 31
To load media for peel-off printing 1 Open the media cover. Chapter 1 - Using the Printer 2 Turn the printhead lift lever clockwise to raise the printhead. PF2i and PF4i Mid-Range Printer User's Manual 17 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 32
Chapter 1 - Using the Printer 3 Pull out the handle to collapse the takeup hub, and then remove any liner. 4 Remove any empty core from the media supply roll post. 3 2 1 4 18 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 33
the edge guide so the roll becomes flush with the center section. 3 2 1 4 6 Remove labels from the first 50 cm (20 in) of the liner. Route the liner through the print mechanism and push it inward toward the center section as far as it goes. bw fw PF2i and PF4i Mid-Range Printer User's Manual 19 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 34
Chapter 1 - Using the Printer 7 Route the liner around the tear bar and the liner drive roller and back under the print mechanism and guide shafts. bw fw Route the Liner Media and Liner Path 20 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 35
Chapter 1 - Using the Printer 8 Insert the start of the liner under the lip of the takeup hub, and then rotate the hub counterclockwise a few turns to wind up some of the liner. Wind Up the Liner Media and Liner Path PF2i and PF4i Mid-Range Printer User's Manual 21 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 36
Chapter 1 - Using the Printer 9 Turn the printhead lift lever counterclockwise to engage the printhead. 10 Adjust the position of the green edge guide so the media is guided with a minimum of play. 22 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 37
Press E to self-calibrate the LTS. d When you are prompted, remove your test label. e Press E. 13 Your printer is configured for Peel-Off mode. Press T to exit the Setup menu. 14 Press the Print button to advance the media and adjust the media feed. PF2i and PF4i Mid-Range Printer User's Manual 23 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 38
so that the next copy in the batch is not printed until the current copy is removed. For more information, see "Accessories for the Printer" on page 145. To load media for cut-off printing 1 Turn off the printer. 2 Open the cutter and media cover. 24 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 39
Chapter 1 - Using the Printer 3 Turn the printhead lift lever clockwise to raise the printhead. 4 Remove any empty core from the media supply roll post. 3 2 1 4 PF2i and PF4i Mid-Range Printer User's Manual 25 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 40
of media on the supply post. Adjust the edge guide so the roll becomes flush with the center section. 3 2 1 4 6 Route the media through the print mechanism and cutter. Then, push it towards the center section as far as it will go. Route the Media 26 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 41
Chapter 1 - Using the Printer Media Path 7 Turn the printhead lift lever counterclockwise to engage the printhead. PF2i and PF4i Mid-Range Printer User's Manual 27 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 42
Chapter 1 - Using the Printer 8 Adjust the position of the green edge guide so the media is guided with a minimum of play. Lock with the nut. 9 Close the media cover. 28 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 43
Chapter 1 - Using the Printer 10 Close the cutter while pulling the media tight. 11 Press the Print button to advance the media and adjust the media feed. The labels can be collected on an optional tray. PF2i and PF4i Mid-Range Printer User's Manual 29 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 44
durable printout that is less vulnerable to external influences, such as oil, chemicals, heat, and sunlight than direct thermal printing. Make sure to select ribbon that matches the type of receiving face material and set up the printer accordingly. 30 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 45
To load ribbon 1 Open the media cover. Chapter 1 - Using the Printer 2 Turn the printhead lift lever clockwise to raise the printhead. PF2i and PF4i Mid-Range Printer User's Manual 31 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 46
Chapter 1 - Using the Printer 3 If necessary, remove any used ribbon and empty ribbon cores. bw fw 4 Slide the ribbon roll onto the supply hub so the ink-coated side faces down when the ribbon is routed through the print mechanism. bw fw 32 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 47
the print mechanism above the transparent upper LSS guide and pull out approximately 20 cm (8 in) of ribbon leader. bw fw 6 Without releasing the ribbon, turn the printhead lift lever counterclockwise to engage the printhead and lock the ribbon. PF2i and PF4i Mid-Range Printer User's Manual 33 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 48
Chapter 1 - Using the Printer 7 Slide the empty cardboard core onto the ribbon rewind hub so the ribbon is wound up when the hub rotates counterclockwise. bw fw 8 Turn the printhead lift lever clockwise to raise the printhead and release the ribbon. 34 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 49
Chapter 1 - Using the Printer 9 Manually advance the ribbon until all of the transparent leader has passed the printhead and the ribbon becomes tight. 10 Turn the printhead lift knob counterclockwise to engage the printhead. PF2i and PF4i Mid-Range Printer User's Manual 35 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 50
print a test label (perform a testprint) to: • make sure that your printer is working properly. • get your printer's setup, hardware, and network information. • get RFID tag information. • check print quality and determine which adjustments to make. 36 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 51
statistics. IPL Testprint Options Testprint Config SW Description Contains current configuration parameters stored in the printer's memory, defined pages, defined formats, defined graphics, defined fonts, and any installed printer options. PF2i and PF4i Mid-Range Printer User's Manual 37 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 52
are sent from the host. This option prints labels for all the UDCs stored in the printer's memory. Font Contains all the characters in a single font. This option prints labels for all the user-defined fonts (UDF) stored in the printer's memory. 38 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 53
the ribbon constant set to 80 and the ribbon factor set to 25. You may need to adjust these values depending on the type of media you choose. • To write to Gen 2 RFID tags using the TAGFIELD command, set the start and length parameters to even numbers. PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 54
write to Gen 2 RFID tags, set the start and length parameters of the RFID tag field setup command (a) to even numbers. For help configuring RFID parameters, see the Intermec Fingerprint Command Reference Manual or the IPL Command Reference Manual. 40 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 55
2 Connecting the Printer This chapter contains these sections: • Connecting the Printer to Your PC • Connecting the Printer to Your Network • Connecting Peripherals to the USB Host Port 41 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 56
Fingerprint only) XON/XOFF, data from host (Fingerprint only) New line (Fingerprint only) Receive buffer (Fingerprint only) Transmit buffer (Fingerprint only) Default Setting 9600 8 None 1 Disable Disable Disable Disable CR/LF 1024 bytes 1024 bytes 42 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 57
PC Through the IEEE 1284 Port If you have a PF4i, you can use the parallel connection with LabelShop or Intermec InterDriver. The parallel port supports Universal Plug and Play (UPnP) and additional status reporting through IEEE 1284 nibble ID mode. PF2i and PF4i Mid-Range Printer User's Manual 43 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 58
an IP address from the network (DHCP+BOOTP). You can use the network connection with LabelShop or the Intermec InterDriver. You can also use this connection to send commands directly to the printer through a terminal connection (Telnet) or FTP. 44 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 59
. 7 When you are prompted to enter a login and password. The default values are: login = admin, password = pass. For help using the printer web page to configure your printer, see "Configuring Your Printer From the Printer Home Page" on page 64. PF2i and PF4i Mid-Range Printer User's Manual 45 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 60
.27.94) and press Enter. The home page of the printer appears. To configure the IP settings serially using IPL 1 Connect the printer to your PC using a serial cable. For help, see "Connecting the Printer to a PC Through the Serial Port" on page 42. 46 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 61
3 Disconnect the printer from the PC. 4 On your PC, enter the IP address of the printer in the address field of your web support PEAP, TTLS, LEAP, and EAP-FAST. For LEAP authentication, the printer supports Open EAP, but does not support Network EAP. PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 62
Add Printer. 6 Step through the Add Printer Wizard until you have successfully added your printer. 7 In the Printer Tasks box, click Wireless Setup Wizard. 8 Step through the Wireless Setup Wizard to set up wireless network and security parameters. 48 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 63
it has an IP address allocated to it. Use the following sections to set most of your wireless communication settings. For more information, see the Intermec Fingerprint Command Reference Manual or the IPL Command Reference Manual. PF2i and PF4i Mid-Range Printer User's Manual 49 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 64
octets, use "%nn," where nn is two hexadecimal digits representing the value of the character Note: The default password for logging in as an admin is "pass." If you have changed the password, you will need to use your password instead of "pass." 50 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 65
representing the value of the character Note: The default password for logging in as an admin is "pass." If you have changed the password, you need to use your password instead of "pass." 2 Send one of send this command: setup write "8021x","uart1:" PF2i and PF4i Mid-Range Printer User's Manual 51 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 66
enable validation: setup "8021x","CA_CERT","c:/test.pfx@export" setup "8021x","VALIDATE","ON" where c:/test.pfx is the location and name of the certificate on the printer and export is the passphrase. 52 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 67
value of the character. Note: The default password for logging in as an admin is "pass." If you have changed the password, you will need to use your password instead of "pass." 2 Send the to activate the settings. ws,ACTIVE,1 PF2i and PF4i Mid-Range Printer User's Manual 53 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 68
octets, use "%nn," where nn is two hexadecimal digits representing the value of the character Note: The default password for logging in as an admin is pass. If you have changed the password, you need to use your password instead of pass. 54 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 69
ws,.EAP_USER,xxxx ws,EAP_PASS,xxxx where xxxx is the unique username and the unique password for this protocol. 4 If you are using TTLS, you may need to send this command to set the to on: ws,ACQUIRE_PAC,ON PF2i and PF4i Mid-Range Printer User's Manual 55 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 70
STX>ws,VALIDATE,ON where c:/testCA.pfx is the location and name of the certificate on the printer and export is the passphrase. • Send the following commands to set a common name for server 1 and server to connect: ws,ACTIVE,1 56 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 71
PC. 2 On your PC, open HyperTerminal. 3 In HyperTerminal, use one of the following Fingerprint commands: • Type DEVICES. The list of devices your printer supports appears. If the USB storage device is supported, it appears as drive d: in this list. PF2i and PF4i Mid-Range Printer User's Manual 57 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 72
again. Connecting a Bar Code Scanner to the USB Host Port If your printer is running Fingerprint, you can connect a HID (Human Interface Device) bar code scanner to the printer. The "usbhost:" device procedure) applies for connected scanners too. 58 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 73
Hub to the USB Host Port You can connect a USB hub to the printer so that you can connect several USB devices to the printer at the same time. Note: If the USB hub is not powered, you USB mass storage devices and multiple HID peripherals at once. PF2i and PF4i Mid-Range Printer User's Manual 59 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 74
Chapter 2 - Connecting the Printer 60 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 75
3 Configuring the Printer Use this chapter to understand how to configure the printer, upgrade firmware, and download fonts and graphics. This chapter contains these sections: • Configuring Your Printer • Choosing an Ethernet or Wireless Network • Upgrading Firmware • Downloading Fonts and Graphics - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 76
the setup tree are organized in a loop. Each main menu branches out to a number of sub-menus. If you have optional accessories installed in your printer, the firmware adds the necessary setup parameters to the Setup tree. 62 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 77
SETUP: COM SETUP: NETWORK SETUP: MEDIA SETUP: TEST/SERVICE The Main Levels of the Setup Menu in IPL SETUP: RFID Option For more information on the IPL and Fingerprint menu systems, see Appendix C, "Fingerprint and IPL Setup Menus" on page 155. PF2i and PF4i Mid-Range Printer User's Manual 63 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 78
link for the settings you want to configure. 6 When you are prompted, enter your login and password. The default values are: login = admin, password = pass. Use the next sections to understand and configure the settings on each configuration page. 64 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 79
Media Settings Use the media page to view and change media settings such as XSTART position, media type, and contrast. To configure media settings 1 Click Printer > Media. PF2i and PF4i Mid-Range Printer User's Manual 65 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 80
RFID Settings (PF2i With RFID Option) Use the RFID page to configure settings for printing on RFID media. To configure media settings 1 Click Printer > Rfid. 2 Enter the correct information for the RFID media you are using. 3 Click Submit Setup. 66 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 81
The value of the head resistance is read-only and is measured by the firmware when the printer starts up. To configure print engine settings 1 Click Printer > Print Engine. 2 Enter the correct information for the print engine. 3 Click Submit Setup. PF2i and PF4i Mid-Range Printer User's Manual 67 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 82
Testfeed [value] Calibrates the label stop sensor performs a testfeed. Selecting this setting is equivalent to issuing the TESTFEED command on the printer. Ribbon Sensor Detects if the printer runs out of ribbon during printing. [value] 68 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 83
Printer > Alerts. 2 Change the alert settings: • From the Setting list, choose Enabled or Disabled. • In the text field, specify a Delay repeat. • In the Delay Unit list, select seconds or occurrences. • In the Message text field, enter a message. PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 84
or in number of labels. The Delay repeat setting represents how often the alert message will be sent when the preset value is reached. Notification Method The method used to send an alert message. You can choose from mail, SNMP-trap, or both. 70 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 85
(WINS name) of the printer. The default name is INTERMEC followed by the last six positions of the MAC address. (Optional) The printer location. (Optional) The printer administrator. You must check this box if you want to change the admin password. PF2i and PF4i Mid-Range Printer User's Manual 71 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 86
only) Defines who may change the network node in the setup. This setting is not supported if you are setting up the printer from its internal keyboard. Users allowed to change wireless settings: Defines who may change WLAN or 802.1x settings. 72 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 87
1 Click Network Admin > Mail. 2 Select the mail server settings and enter mail addresses. 3 Click: • Submit Mail Settings to send the changes to the printer. • Submit & Send test mail to send the changes to the printer and test your new settings. PF2i and PF4i Mid-Range Printer User's Manual 73 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 88
if the recipient is unreachable. To prevent e-mail bounces when the recipient is unreachable, leave this field empty. • To address: The recipient of alert messages. To enter several addresses, separate them with a comma (,) or a semicolon (;). 74 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 89
to add trap settings. You can define up to four authentication failure traps. After you add a trap, it appears in the Trap Address Settings list. You can edit or delete each trap in the list by clicking Edit or Delete. 4 Click Submit SNMP settings. PF2i and PF4i Mid-Range Printer User's Manual 75 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 90
are sent. The default port if 162. • Trap Community: Defines the community to which SNMP traps will be sent. • Friendly Name: A user-defined text string that identifies the trap. • Trap Enable Status: Defines whether the specified trap is enabled. 76 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 91
address is assigned to the printer. You can choose between DHCP, BOOTP, DHCP+BOOTP, or MANUAL. Address: The current IP address of the printer. Netmask: Manually assigned netmask for the printer. Default Router: The IP address of the default router. PF2i and PF4i Mid-Range Printer User's Manual 77 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 92
on the configuration of your DHCP server. NET1 TCP Port Number: The port number for raw TCP. The default is 9100. NET1 Queuing: Determines whether queuing for the TCP port is turned on, off, or enabled for multiple network connections (Multi). 78 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 93
for the changes to take effect. Note: Once you change the network type to Wireless 802.11, you cannot communicate with the printer using Ethernet. You need to change the command through the Setup menu or send a command through a serial connection. PF2i and PF4i Mid-Range Printer User's Manual 79 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 94
Manual settings: Enables Avalanche. You need to enter the Agent address and Port in the text fields. • Find agent by broadcast: Enables Avalanche and the network connection broadcasts to find the agent. Enter your user name and password in the entry fields. 80 PF2i and PF4i Mid-Range Printer User - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 95
Chapter 3 - Configuring the Printer Configuring SmartSystems Settings Use the SmartSystems page to view or change the SmartSystems server IP 1 Click Network Admin > SmartSystems. 2 View or change the settings. 3 Click Submit SmartSystems settings. PF2i and PF4i Mid-Range Printer User's Manual 81 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 96
Active WEP key Description The network name of the printer. Set the operating mode of the device to Ad-Hoc or Infrastructure. Set Wired Equivalent Privacy (WEP) to on or off. You can enter values for up to 4 WEP keys. Chooses the active WEP key. 82 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 97
the printer is connected. (Read only) Radio signal strength of the access point. (Read only) Speed of the current connection. (Read only) Shows the country short names provided by the 802.11d standard for the currently selected region or country. PF2i and PF4i Mid-Range Printer User's Manual 83 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 98
.1x settings page is only available if you have the optional wireless interface installed in your printer. Use the 802.1x page to view and change 802.1x security settings. To configure LEAP • PEAP • EAP-FAST • Off (disables 802.1x security) (default) 84 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 99
at least one of them. The default is "" (any common name). Server Certificate Enables certificate validation. Specifies whether or not Validation (TTLS to check if the installed CA certificate is the root of the and PEAP only) server certificate. PF2i and PF4i Mid-Range Printer User's Manual 85 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 100
HyperTerminal as you type. If you want to see what you are typing with IPL, you need to perform the following procedure. 86 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 101
bar codes. You can download SmartSystems Foundation at no charge from the Intermec website. For more information on SmartSystems, go to www.intermec.com/SmartSystems. To purchase an AutoDeploy license, contact your local Intermec sales representative. PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 102
previous section "Configuring Your Printer Using SmartSystems Foundation." • from the printer home page. For help, see "Configuring the Network Type" on page 79. • using PrintSet. For help, see "Configuring Your Printer With PrintSet" on page 86. 88 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 103
Ethernet or Wireless 802.11. • If you are using IPL, send this command to the printer: n,,,p where p is either 0 (select Ethernet interface) or 1 (Select Wireless 802.11 interface). 3 Reboot the printer for the change to take effect. PF2i and PF4i Mid-Range Printer User's Manual 89 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 104
Go to Printer > Firmware Wizard. 5 Follow the steps to update your firmware. To upgrade using a CF card 1 Copy the firmware upgrade file to a CF card. 2 Insert the CF card in the appropriate slot on the back of your printer. 3 Turn on your printer. 90 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 105
to restart your printer. To upgrade using a serial or USB connection • Use Fingerprint or IPL commands to send the upgrade file to your printer. For help, see the Intermec Fingerprint Command Reference Manual or the IPL Command Reference Manual. PF2i and PF4i Mid-Range Printer User's Manual 91 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 106
printer on the Intermec website at www.intermec.com. • Fingerprint or IPL commands. For help, see the Intermec Fingerprint Command Reference Manual or the IPL Command Reference Manual. • a CompactFlash card or external 2GB USB mass storage device. 92 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 107
possible solutions to problems you may encounter while using the printer. This chapter also contains information on booting the printer and performing routine maintenance. This chapter contains these sections: • Troubleshooting the Printer • Adjusting the Printer • Maintaining the Printer 93 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 108
sure you have the following information ready: • Printer serial number • Firmware type and version • Ethernet, wireless, or serial port settings You can find all of the information listed above in the printer menu system or on a test print page. 94 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 109
. When errors added to the built-in error handling occur, this event is set. The text included in the SNMP trap is the standard text corresponding to the error. The printhead is lifted. Lower the printhead. Blinking 1701 1702 1703 1704 1022 PF2i and PF4i Mid-Range Printer User's Manual 95 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 110
of ribbon. For helps, see "Loading Ribbon" on page 30. Pause Mode The print job is paused. Entered Blinking Power supply The power supply is overheated and needs to cool Off Over down. temperature 1007 1008 1031 1320 1321 1005 1027 1718 96 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 111
test feed calibrates the sensor. To perform a testfeed, press the Print button. Transfer ribbon is installed This is not an error condition. This message briefly Blinking appears after a new roll of transfer ribbon is installed. 1088 1606 1058 PF2i and PF4i Mid-Range Printer User's Manual 97 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 112
Lower the printhead. Blinking Psu Over Power supply over temperature Off Temp Ribbon Fitted This is not an error condition. This message briefly Blinking appears after a new roll of transfer ribbon is installed. 1058 1022 1059 1701 1005 1027 98 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 113
, see "Adjusting the Printhead Pressure" on page 111. • Replace the printhead. For help, see "Replacing the Printhead" on page 120. The printout is weaker on one side. Adjust the pressure arm. For help, see "Adjusting the Pressure Arm" on page 106. PF2i and PF4i Mid-Range Printer User's Manual 99 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 114
. Try these possible solutions in order: • The printhead may be failing. Replace the printhead. For help, see "Replacing the Printhead" on page 120. • The strobe signal may be failing. For help, contact your Intermec service representative. 100 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 115
for the type of media you are using. • Make sure that the ribbon is fitted correctly. Reload the ribbon. For help, see "Loading Ribbon" on page 30. • The energy control may be faulty. For help, contact your Intermec service representative. PF2i and PF4i Mid-Range Printer User's Manual 101 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 116
• Make sure that your printer is correctly configured for your network. If you are connecting your printer with a crossover network cable, you may need to disable the web browser's proxy settings on your computer to access your printer's home page. 102 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 117
a level of security that is not allowed by the tag type. Make sure that you are using the appropriate media for your application. PF2i and PF4i Mid-Range Printer User's Manual 103 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 118
But, it does not reset settings that have already been read when the files. So, wireless communication settings, such as SSID and keys retain their values from the previous start. However, the next reboot resets them to the factory default values. 104 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 119
is not reset. Adjusting the Printer You may need to adjust your printer to accommodate your printing needs or improve performance. You can adjust the: • pressure arm. • label stop sensor (LSS) position. • printhead pressure. • ribbon break shaft. PF2i and PF4i Mid-Range Printer User's Manual 105 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 120
Troubleshooting and Maintaining the Printer Adjusting the Pressure Arm The printer is factory-adjusted for full-size media width. If you are using media that is less than full width, Intermec arm 1 Open the media cover. 2 Remove any ribbon. 106 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 121
shaped labels, align the LSS with the front tips of the labels. One part of the sensor is on the upper media guide and the other part of the sensor is under the lower guide. You need to adjust the guides individually to the same position. PF2i and PF4i Mid-Range Printer User's Manual 107 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 122
as far as possible. 2 One at a time, pull the sensors out while counting the clicks. To test the LSS 1 Make sure that your printer is properly configured for the type of media you are using. Go to SETUP > MEDIA > MEDIA TYPE. 2 Open the media cover. 108 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 123
physically in position, is blocked by dust or stuck labels, or is defective in some way. 8 Check gap detection: a Lift the printhead. b Slowly pull out the media. When the LSS detects a gap or detection slot, the cursor moves to the right. LSS AUTO PF2i and PF4i Mid-Range Printer User's Manual 109 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 124
parts of the LSS are aligned with each other. • the transfer ribbon is properly loaded so it does not interfere with the LSS. For help, see "Loading Ribbon" on page 30. • the LSS guides are clean and free from stuck labels another type of media. 110 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 125
quality. For help, see "Printing a Test Label" on page 36. To return the printhead pressure to the factory default setting • Tighten the screw (+) as far as you can, and then loosen it (-) six full turns for a PF2i and four full turns for a PF4i. PF2i and PF4i Mid-Range Printer User's Manual 111 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 126
to help load media from behind the print mechanism and guide media from an external supply. The quick-load guides are designed for media that is 40 to 60 mm (1.57 to 2.36 in) wide. Note: Quick-load guides cannot be used for peel-off printing. 112 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 127
the Printer To install the quick-load guides 1 Turn off the printer. 2 Open the media cover. 3 Disengage the upper guide from the lower guide by lifting the inner part of the upper guide and pulling it out. Make sure not to damage the cable. PF2i and PF4i Mid-Range Printer User's Manual 113 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 128
standard green edge guide. 6 Slide the quick-load guides onto the shaft, making sure that the lower media guide rail slides through the notches. 7 Slide the inner guide as far as possible down the shaft so that it is flush with the center section. 114 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 129
for cleaning the printer: • Always remove the power cord before cleaning. • Never spray the printer. Protect it from water when cleaning the premises. • Never use any sharp tools for removing stuck labels. The printhead and rollers are delicate. PF2i and PF4i Mid-Range Printer User's Manual 115 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 130
the beam of light. If necessary, clean the guides. Isopropyl alcohol [(CH 3)2CHOH; CAS 67-63-0] is a highly flammable, moderately toxic, and mildly irritating substance. To clean the media guide 1 Turn off the printer. 2 Open the media cover. 116 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 131
guide and pulling it out. Make sure not to damage the cable. 4 Lift the upper guide. 5 Clean the areas marked with gray with a cleaning card or a soft cloth soaked in isopropyl alcohol. Be careful not to scratch the guides. 6 Replace the upper guide. PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 132
a cotton swab moistened with isopropyl alcohol. Isopropyl alcohol [(CH 3)2CHOH; CAS 67-63-0] is a highly flammable, moderately toxic, and mildly irritating substance. To clean the printhead 1 Turn off the printer. 2 Open the media cover. 118 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 133
the printhead. 8 Wait for approximately 30 seconds to allow the cleaning fluid to dissolve the residue. 9 Repeat Steps 6 through 8. 10 If necessary, repeat the process with a fresh cleaning card. 11 Allow the cleaned parts to dry before loading media and ribbon. PF2i and PF4i Mid-Range Printer User - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 134
speed, and the ambient temperature. You must turn off the power before replacing the printhead. The firmware can only detect the new printhead when the printer is restarted. To replace the printhead 1 Turn off the printer. 2 Open the media cover. 120 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 135
Chapter 4 - Troubleshooting and Maintaining the Printer 3 Turn the printhead lift lever clockwise to raise the printhead. 4 Remove any media and transfer ribbon. 5 Pull the printhead bracket away from the magnet in the pressure arm. PF2i and PF4i Mid-Range Printer User's Manual 121 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 136
the printhead bracket from the print mechanism, and pull out the printhead as far as the cables allow. 7 Disconnect the cables from the printhead: • Note the snap-lock on the inner connector. • Be sure to pull at the connectors, not at the cables. 122 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 137
that the printhead cables run freely. 10 Turn the printhead lift lever counterclockwise so the magnet engages the printhead bracket. 11 Load a new supply of media and ribbon. For help, see "Loading Media" on page 7 and "Loading Ribbon" on page 30. PF2i and PF4i Mid-Range Printer User's Manual 123 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 138
Chapter 4 - Troubleshooting and Maintaining the Printer 124 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 139
A Specifications This appendix contains specifications for the printer and media. It also contains information about accessories for the printer. 125 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 140
paper cutter: 25.3 x 44.7 x 17.8 cm (9.96 x 17.60 x 7.00 in) With 8-in Megatop: 24.4 x 47.1 x 22.5 cm (9.61 x 18.54 x 8.86 in) PF4i Weight: 7 to 8 kg (15.5 to 17.7 lb) Power Specifications Printer ) card (optional) • USB memory device (optional) 126 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 141
(1 to 2.36 in) PF4i 55 to 110 mm (2.17 to 4.33 in) Ribbon Roll Diameter (outer, max) 64 mm (2.56 in) 240 to 300 m (787 to 985 ft) of ribbon, depending on ribbon thickness Ribbon Roll Core Diameter (inner) 25.4 mm (1.00 in) Print Directions 4 PF2i and PF4i Mid-Range Printer User's Manual 127 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 142
Specifications Interfaces This section describes the standard interfaces available on the printer printer. RS-232 Serial Interface Use this table to understand the default settings of the serial port. Default mA Transmit data Receive data Ground 128 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 143
the printer has a USB Type A connector on one end to connect to the PC and a USB Type B connector on the other end to connect to the printer. You do not need to configure communications for the USB port. USB Type A Connector USB Type B Connector PF2i and PF4i Mid-Range Printer User's Manual 129 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 144
RJ-45 cable. The interface supports 10/100 Mbps Fast Ethernet (10BASE-T, 100BASE-TX) and is fully compliant with the IEEE 802.3u standard. The network card MAC address can be found on the label below the socket. Ethernet Socket Ethernet Connector 130 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 145
Data 0-7 nAcknowledge Busy Perror Select nAutoFd Not connected Chassis ground External +5 V DC Signal ground nInit nFault Signal ground Not connected nSelectIn Transmitter Host Host Printer Printer Printer Printer Comments Max 500 mA Printer PF2i and PF4i Mid-Range Printer User's Manual 131 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 146
(2.36 in) 25.0 mm (1.00 in) 40 mm (1.57 in) PF4i Media Width (a) Measurement Maximum Minimum, standard guides Minimum, quick-load guides Minimum, wide quick-load guides Value 114.3 mm (4.50 in) 25.0 mm (1.00 in) 40 mm (1.57 in) 80.0 mm (3.15 in) 132 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 147
Media Type Set media type to one of these values: • Fingerprint: • FIX LENGTH STRIP • VAR LENGTH STRIP • IPL: CONTINUOUS a Appendix A - Specifications Non-Adhesive Strip PF2i and PF4i Mid-Range Printer User's Manual 133 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 148
equally on both sides. PF2i Media Width Excluding Liner (c) Measurement Maximum Minimum Value 58.4 mm (2.30 in) 23.8 mm (0.94 in) PF4i Media Width Excluding Liner (c) Measurement Maximum Minimum Value 112.7 mm (4.43 in) 23.8 mm (0.94 in) 134 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 149
Media Type Set media type to one of these values: • Fingerprint: • FIX LENGTH STRIP • VAR LENGTH STRIP • IPL: CONTINUOUS a Appendix A - Specifications c b b Self-Adhesive Strip PF2i and PF4i Mid-Range Printer User's Manual 135 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 150
: 40% (DIN 53147). PF2i Label Width Excluding Liner (c) Measurement Maximum Minimum Value 58.4 mm (2.30 in) 23.8 mm (0.94 in) PF4i Label Width Excluding Liner (c) Measurement Maximum Minimum Value 112.7 mm (4.43 in) 23.8 mm (0.94 in) 136 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 151
users to test this in their unique application. Label Gap (e) Measurement Maximum Recommended Minimum Value 21.3 mm (0.83 in) 3.0 mm (0.12 in) 1.2 mm (0.05 in) The Label Stop Sensor (LSS) must be able to detect the extreme front edges of the labels. PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 152
Appendix A - Specifications a c d e b b Self-Adhesive Labels Media Type Set media type to one of these values: • Fingerprint: LABEL (w GAPS) • IPL: GAP 138 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 153
(e) to be larger than 7 mm (0.28 in), that batch printing is used, and that no pull back of the media is performed. Intermec does not guarantee that such short tickets will work, but it is up to users to test this in their unique application. PF2i and PF4i Mid-Range Printer User's Manual 139 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 154
Appendix A - Specifications LSS Detection Position (c) This position is variable. For help, see "Adjusting the Label Stop Sensor" on page 107. Detection Slit Length (d) The length edge of the media, because the media may split and jam the printer. 140 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 155
a b c e d Appendix A - Specifications Tickets With Gaps (Gap Stock) PF2i and PF4i Mid-Range Printer User's Manual 141 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 156
Specifications Tickets With Black Mark (Mark Stock) PF2i Media Width Including Liner (a) Measurement Maximum Minimum, standard guides Minimum, quick-load guides Value 60 mm (2.36 in) 25.0 mm (1.00 in) 40 mm (1.57 in) PF4i in) 5.0 mm (0.2 in) 142 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 157
Appendix A - Specifications Black Mark Y-Position (f) Intermec recommends that you place the black mark as close to the front amount of media feed to avoid unintentional detection. For help, see the Intermec Fingerprint Command Reference Manual. PF2i and PF4i Mid-Range Printer User's Manual 143 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 158
and shape of the tag. Specific recommendations for different kinds of Intermec-approved RFID media can be found on the Intermec website at www.intermec.com. Additional information is provided in the documentation that came with your RFID kit. 144 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 159
another copy. The LTS cannot be used with a paper cutter. If you are running Fingerprint or Direct Protocol, you can enable or disable the LTS using the commands LTS& ON and LTS& OFF. For help, see the Intermec Fingerprint Command Reference Manual. PF2i and PF4i Mid-Range Printer User's Manual 145 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 160
by an Intermec authorized service technician. The printer can accommodate these interface boards: • 802.11 Radio Interface Board • Parallel Interface Board (IEEE 1284) • Serial/Industrial Interface Board • RFID/Serial Interface Board (PF2i, only) 146 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 161
B Default Settings 147 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 162
Receive buffer Transmit butter Default Value 9600 8 None 1 Disable Disable Disable Disable CR/LF 1024 bytes 1024 bytes Net-Com "net1:" Parameters Parameter New line Default Value CR/LF COM Parameters Parameter USB keyboard Default Value US 148 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 163
is installed) Wireless 802.11 (if an 802.11 radio is installed) RFID Parameters Parameter Mode Tagadjust Retries Voidtext Fieldstrength Default Value Enable +0% 1 N/A 100 Feedadjust Parameters Parameter Startadjust Stopadjust Default Value 0 0 PF2i and PF4i Mid-Range Printer User's Manual 149 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 164
1800 dots Label (with gaps) Thermal transfer 90 25 0 14 0 dots 85 40 +0% 10 0 dots N/A Fast 0 Print Defines Parameters Parameter Head resistance Testprint Print speed LSS test Clip default Cmd language Default Value N/A N/A 100 mm/sec N/A Off N/A 150 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 165
XON/XOFF COM Parameters Parameter USB keyboard Default Value US Network Parameters Parameter IP selection IP address Netmask Default router IPv6 selection IPv6 address Nameserver Nameserver6 Default Value DHCP+BOOTP N/A N/A N/A Auto N/A N/A N/A PF2i and PF4i Mid-Range Printer User's Manual 151 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 166
Tagadjust Retries Voidtext Fieldstrength Default Value Enable N/A +0% 1 N/A 100 Test/Service Parameters Parameter Testprint Config Test labels Format Page UDC Font Data dump Memory reset LSS test Cmd language Default Value N/A No All N/A N/A 152 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 167
Ribbon low Paper low Configuration Parameters Parameter Emulation mode Print speed Cutter LTS calibration Appendix B - Default Settings Default Value Gap DT (Direct Thermal) 1200 dots Fast 420 0% 0 0 0 0 0 Default Value None 4 in/sec Not installed Not installed PF2i and PF4i Mid-Range Printer User - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 168
Appendix B - Default Settings 154 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 169
C Fingerprint and IPL Setup Menus The setup parameters of the printer control the way the printer operates. This appendix provides an overview of the setup menu you can use to configure parameters for your printer. 155 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 170
: 1024 Fingerprint Net-Com,NET1 Menu SETUP: NET-COM,NET1 NET-COM,NET1: NEW LINE NEW LINE: CRN/ELWFLINE: LFNEW LINE: CR 156 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 171
ADDRESS IP ADDRESS: 0.0.0.0 NETWORK: NETMASK NETMASK: 0.0.0.0 NETWORK: DEFAULT ROUTER DEFAULT ROUTER: 0.0.0.0 NETWORK: IPV6 SELECTION NETWORK: IPV6 ADDRESS IPV6 SETUP: FEEDADJ FEEDADJ: STARTADJ STARTADJ: +0 FEEDADJ: STOPADJ STOPADJ: +0 PF2i and PF4i Mid-Range Printer User's Manual 157 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 172
0 Only displayed if a paper sensor is installed. MEDIA: TESTFEED MEDIA: TESTFEED MODE MEDIA: LEN (SLOW MODE) TESTFEED: 26 28 0 10 Press E to perform a testfeed. Values are read-only. TESTFEED MODE: FATSETSTFEED MODE: SLOW LEN (SLOW MODE): 0 158 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 173
LANGUAGE: ZSCiMmD LANGUAGE: DSim PRINT DEFS: LTS Only displayed if a paper sensor is installed. LTS: LTS ADJUST LTS: LTS TEST LTS: LTS VALUE REMOVE LABEL AND PRESS ENTER REMOVE LABEL ENTER TO STOP LTS VALUE: 10 SENSITIVITY 10 OUT OF 9-10 PF2i and PF4i Mid-Range Printer User's Manual 159 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 174
Menu SETUP: SER-COM SETUP: COM SETUP: NETWORK SETUP: RFID SETUP: TEST/SERVICE SETUP: MEDIA SETUP: CONFIGURATION IPL Ser-Com Menu SETUP: SER-COM SER-COM USUSB KEYBOARD: SWUESDBISKHEYBOARD: FRUESNBCHKEYBOARD: GEURSMBANKEYBOARD: USER DEFINED 160 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 175
LANGUAGE: IPCLMD LANGUAGE: ZSCiMmD LANGUAGE: DSCiMmD LANGUAGE: FiCnMgDerLpArNiGnUtAGE: Direct Protocol LTS: LTS ADJUST REMOVE LABEL AND PRESS ENTER SENSITIVITY 10 OUT OF 9-10 LTS: LTS TEST REMOVE LABEL ENTER TO STOP LTS: LTS VALUE LTS VALUE: 10 PF2i and PF4i Mid-Range Printer User's Manual 161 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 176
POINT MEDIA: FORM ADJ DOTS X MEDIA: FORM ADJ DOTS Y MEDIA: RIBBON LOW MEDIA: PAPER LOW LBL REST POINT: 0 0/2/4/6/8/10/15/20/25/ 30/-30/-25/- Labels are fed out REMOVE LABEL AND PRESS ENTER Press E SENSITIVITY 9 OUT OF 8-14 Read only, press E 162 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 177
D Advanced Configuration This appendix contains information on the printer file system and how to modify the appearance of the printer web page. 163 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 178
system of the printer is case-sensitive, which is important because filenames in Fingerprint commands are translated into capital letters by default. Directories or files with lowercase names are inaccessible for Fingerprint commands and programs. 164 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 179
(CF) card file system used to store files such as large fonts and images. You can also use the CF card to upgrade printer firmware. /dev This directory contains devices used for input/output, such as uart1, Flash, net1, parallel IEEE 1284. PF2i and PF4i Mid-Range Printer User's Manual 165 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 180
the default web pages. /rom/secure (or rom:secure) This directory is used to store the password protected web pages. /tmp (or tmp:) This is the printer's printer appear in the Intermec style. The colors and logo of the customer are ignored. 166 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 181
Variable bgco coli cona Description Background color, BGCOLOR attribute of BODY tag. Copyright link, link to html file showing Copyright notes. Company name. PF2i and PF4i Mid-Range Printer User's Manual 167 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 182
attributes for the IMG-tag to replace the Intermec logo. Trade name. Optional Environment Variables The label to be shown on the web page. If this parameter is in the webstyle guide file, the variables "heli" and "hena" must have a value. 168 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 183
the webstyle guide file, then the variables "suli" and "suna" must have a value. Support link, this is the link associated withe the support tag. Support link name, this is the label to be shown are separated by ampersand (&) characters. PF2i and PF4i Mid-Range Printer User's Manual 169 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 184
one assumed. Intermec recommends that you use the FTP server to transfer the files. Example (the default Web Style Guide): bgco=%23ffffff& Intermec+Technologies+Corporation&coli=copyrigh t.htmf&suli=support.htmf&suna=Support&suon=t&trna=Eas yCoder 170 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 185
I Index 171 - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 186
5 understanding 5 core and roll, media specifications 132 cover, options 146 creating labels 39 cut-off cutter, eprrrionrtimnges, sloagaedi9n5g, media 98 24 D default configuration Fingerprint 148 IPL 151 sseetrtiainl gpsor1t4s8e-tt1i5n3gs 42 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 187
159 RFID menu 157 PF2i and PF4i Mid-Range Printer User's Manual Index Ser-Com, UART1 menu 156 Setup menu illustration 63 sounds, described 7 using commands to upgrade firmware 91 using to configure network type 89 using to configure the printer 86 using to download fonts and graphics 92 using to - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 188
16 self-strip printing 16 tear-off printing 8 loading ribbon 30 login name, home page 45 LSS position, adjusting 107 LSS too high, error message 96 LSS too low, error message 96 LSS, testing 108 LTS accessory 145 loading media 16, 24 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 189
from web page 79 PF2i and PF4i Mid-Range Printer User's Manual Index network, connecting your printer 44 next label not found, error message 96 no printhead, error message 98 no RFID support installed, error message 96 no RFID support, error message no 103 tag1f0o3u,n1d0,4error - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 190
, accessory 146 replacing, printhead 120 required environment variables, web style guide 167 resetting the printer 104 RFID error codes, troubleshooting 104 media, printing on 39 menu Fingerprint 157 IPL 161 tsreottuinblgess,hcooontfiinggur1in0g3-61604 PF2i and PF4i Mid-Range Printer User's Manual - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 191
menu PF2i and PF4i Mid-Range Printer User's Manual Index changing command language 4 Fingerprint illustration 63 IPL illustration 63 setup menus Fingerprint 156 IPL 160 Setup mode entering 62 navigating 62 Shift button, described 5 slow printing, troubleshooting 103 SmartSystems configuring with - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 192
, described 5 thermal transfer ribbon, loading 30 thumb drive. See USB mass storage drive tickets with black mark, media specifications 142 tickets with gaps, media specifications 139 troubleshooting printer 94 resetting the printer 104 U updates, downloading firmware 90 upgrading firmware 90 URL - Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 193
- Intermec PF4i | PF2i and PF4i Mid-Range Printer User's Manual - Page 194
Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2014 Intermec Technologies Corporation. All rights reserved. PF2i and PF4i Mid-Range Printer User's Manual *935-023-003* P/N 935-023-003
PF
2i
| PF
4i
Mid-Range Printer
User’s
Manual