Intermec PF4i PF2i and PF4i Mid-Range Printer User's Manual - Page 133
Repeat Steps 6 through 8., Wait for approximately 30 seconds to allow the cleaning fluid
View all Intermec PF4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Chapter 4 - Troubleshooting and Maintaining the Printer 3 Turn the printhead lift lever clockwise to raise the printhead. 4 Remove any media and ribbon. 5 Open the cleaning card envelope and pull out the cleaning card. Read the warning text. 6 Insert most of the cleaning card under the printhead, and then lower the printhead. 7 Pull out the cleaning card and raise the printhead. 8 Wait for approximately 30 seconds to allow the cleaning fluid to dissolve the residue. 9 Repeat Steps 6 through 8. 10 If necessary, repeat the process with a fresh cleaning card. 11 Allow the cleaned parts to dry before loading media and ribbon. PF2i and PF4i Mid-Range Printer User's Manual 119
Chapter 4 — Troubleshooting and Maintaining the Printer
PF2i and PF4i Mid-Range Printer User’s Manual
119
3
Turn the printhead lift lever clockwise to raise the printhead.
4
Remove any media and ribbon.
5
Open the cleaning card envelope and pull out the cleaning card.
Read the warning text.
6
Insert most of the cleaning card under the printhead, and then
lower the printhead.
7
Pull out the cleaning card and raise the printhead.
8
Wait for approximately 30 seconds to allow the cleaning fluid to
dissolve the residue.
9
Repeat Steps 6 through 8.
10
If necessary, repeat the process with a fresh cleaning card.
11
Allow the cleaned parts to dry before loading media and ribbon.