Intermec PF4i PF2i and PF4i Mid-Range Printer User's Manual - Page 37
PRINT DEFS, ADJUST, CONFIGURATION, CALIBRATION, Print, to self-calibrate the LTS.
View all Intermec PF4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
11 Close the media cover. Chapter 1 - Using the Printer 12 Adjust the label taken sensor (LTS) so that the media feeds correctly. a On your printer's keypad, press T to enter the Setup menu. b If you are using Fingerprint, go to PRINT DEFS > LTS > LTS ADJUST. If you are using IPL, go to CONFIGURATION > LTS CALIBRATION and press E. c Press E to self-calibrate the LTS. d When you are prompted, remove your test label. e Press E. 13 Your printer is configured for Peel-Off mode. Press T to exit the Setup menu. 14 Press the Print button to advance the media and adjust the media feed. PF2i and PF4i Mid-Range Printer User's Manual 23
Chapter 1 — Using the Printer
PF2i and PF4i Mid-Range Printer User’s Manual
23
11
Close the media cover.
12
Adjust the label taken sensor (LTS) so that the media feeds
correctly.
a
On your printer’s keypad, press
T
to enter the Setup menu.
b
If you are using Fingerprint, go to
PRINT DEFS
>
LTS
>
LTS
ADJUST
.
If you are using IPL, go to
CONFIGURATION
>
LTS
CALIBRATION
and press
E
.
c
Press
E
to self-calibrate the LTS.
d
When you are prompted, remove your test label.
e
Press
E
.
13
Your printer is configured for Peel-Off mode. Press
T
to exit the
Setup menu.
14
Press the
Print
button to advance the media and adjust the media
feed.