Intermec PF4i PF2i and PF4i Mid-Range Printer User's Manual - Page 30
Loading Media for Peel-Off Printing
View all Intermec PF4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 1 - Using the Printer 5 Insert the media between the guides and feed the media forward until it reaches the platen roller and stops. 6 Press the Print button while pushing the media forward. Tear off the media by pulling it downward. 7 Close the media cover. Loading Media for Peel-Off Printing In peel-off, or self-strip mode, self-adhesive labels are separated from the liner immediately after printing. Peel-off printing: • can only be used for self-adhesive labels with liner. • cannot be performed with optional quick-load guides installed. • sets high demands on the media, such as label stiffness, release characteristics of the adhesive and liner, and resistance against electrostatic charging. Consult your media supplier or test the media to make sure that it is suitable for your application. • may limit registration performance when printing on labels that have a label length of less than 25 mm (1 in). You can also install an optional label taken sensor so that the next copy in the batch is not printed until the current copy is removed. For more information, see "Accessories for the Printer" on page 145. 16 PF2i and PF4i Mid-Range Printer User's Manual