Intermec PF4i PF2i and PF4i Mid-Range Printer User's Manual - Page 70
All variables are returned with the exception of EAP_PASS, those used by the access point
View all Intermec PF4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Chapter 2 - Connecting the Printer 6 If you are using certificates for validation, here are some commands you may need to use. • Send the following commands to set a certificate and enable validation: ws,CA_CERT,c:/testCA.pfx@export ws,VALIDATE,ON where c:/testCA.pfx is the location and name of the certificate on the printer and export is the passphrase. • Send the following commands to set a common name for server 1 and server 2: ws,.SERVER_CN1,xxxxxxxxxx ws,.SERVER_CN2,xxxxxxxxxx where xxxxxxxxxx is at least 8 characters but less than 96 characters. • Send the following command to make sure your values match those used by the access point: wt All variables are returned with the exception of EAP_PASS which always returns "****" if configured and CA_CERT which transmits the name of the last certificate authority successfully installed. An additional read-only variable for the supplicant state, called STATE, is also returned. • You may need to send the following command several times for the wireless station to connect: ws,ACTIVE,1 56 PF2i and PF4i Mid-Range Printer User's Manual