Intermec PF4i PF2i and PF4i Mid-Range Printer User's Manual - Page 126
Adjusting the Ribbon Break Shaft, Installing Quick-Load Guides
View all Intermec PF4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Chapter 4 - Troubleshooting and Maintaining the Printer Adjusting the Ribbon Break Shaft If ribbon wrinkling occurs, you may need to adjust the alignment of the front ribbon break shaft so that it runs parallel to the printhead and the ribbon supply and rewind hubs. To adjust the ribbon break shaft • Using a slotted screwdriver, carefully turn the adjustment screw: • If the ribbon tends to slide outward, turn the screw clockwise (fw) to move the outer end of the break shaft forward. • If the ribbon tends to slide inward, turn the screw counterclockwise (bw) to move the outer end of the break shaft backward. Adjustment screw Ribbon break shaft Installing Quick-Load Guides You can use the quick-load guides to help load media from behind the print mechanism and guide media from an external supply. The quick-load guides are designed for media that is 40 to 60 mm (1.57 to 2.36 in) wide. Note: Quick-load guides cannot be used for peel-off printing. 112 PF2i and PF4i Mid-Range Printer User's Manual