JVC DLA-NX5 Operation Manual 1 - Page 21
Connecting to the TRIGGER Terminal, Connecting the Power Cord (Supplied Accessory)
View all JVC DLA-NX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connecting to the TRIGGER Terminal Screen Set up This Unit To [TRIGGER] Terminal Trigger Cable (Sold Separately) Trigger Input Terminal (Ø3.5) 0 Do not use it to supply power to other devices. 0 Connecting to the audio terminal of another device may cause the device to malfunction or break down. 0 Using beyond the rated value will cause the unit to malfunction. 0 The trigger terminal outputs a voltage of 12 V. Exercise adequate caution to prevent short circuit. 0 The factory setting is "Off". To change the setting, configure the "Trigger" item in the menu (P. 64). Connecting the Power Cord (Supplied Accessory) A Connect the power cord supplied to the power input terminal on the main unit B Insert the supplied power plug into the wall outlet. A Power Cord (Supplied) B Precautions to prevent fire and electric shock 0 The power consumption of this unit is large. Please connect it directly to the wall outlet. 0 When you are not using the projector, please unplug the power cord from the outlet. 0 Connect it using only the power cord supplied. 0 Do not use a voltage other than the indicated power voltage. 0 Do not damage, break or modify the power cord. Do not place a heavy object on the power cord, or heat or pull it. Doing so may damage the power cord. 0 Do not unplug the power cord with wet hands. 21