JVC DLA-NX5 Operation Manual 1 - Page 67
Maintenance, Replacing the Lamp, Lamp Replacement Procedure
View all JVC DLA-NX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Replacing the Lamp The lamp is a consumable item. If the image appears dark or the lamp goes out, replace the lamp unit. 0 When the lamp replacement time approaches, the user is notified with a message displayed on the screen and by the indicator. (P. 87) Lamp Replacement Procedure CAUTION 0 Do not insert your hands into the lamp compartment. This could cause significant deterioration in the performance of the equipment, or lead to injury and electric shock. 0 Do not replace the lamp immediately after the unit has been used. Allow a cooling period of at least one hour before replacement. The temperature of the lamp is still high, and may cause burn injuries. 0 Do not subject the lamp unit to shock. Doing so may cause lamp blowout. 0 Do not use a flammable air duster to clean the internal parts of the unit. Doing so may cause fire. 0 Use only genuine replacement parts for the lamp unit. Also, never attempt to reuse an old lamp unit. Doing so may shorten the lamp life and cause a malfunction. 0 Do not touch the surface of a new lamp. Doing so may shorten the lamp life and cause lamp blowout. 0 When replacing the lamp, be careful not to injure yourself as the lamp may be broken. 0 When replacing the lamp of a projector suspended from the ceiling, work at height is required. This is a dangerous operation. Please consult our service center. 1 Remove the power plug from the outlet 2 Remove the lamp cover 0 Remove the screw with a t screwdriver 3 Loosen the screws of the lamp unit 0 Loosen the screws with a t screwdriver. 4 Pull out the lamp unit 5 Install the new lamp unit Maintenance 67