JVC DLA-NX5 Operation Manual 1 - Page 64
Func Function, Language, Trigger, Off Timer, ECO Mode, Adjust/Set
View all JVC DLA-NX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Logo For setting the display of logo during startup to "On" or "Off". Setting Off On Description Not displayed. Displays the "D-ILA" logo for 5 seconds during startup. Language For setting the display language to "English", "Deutsch", "Español", "Italiano", "Français", "Português", "Nederlands", "Polski", "Norsk or Function Adjust/Set Trigger For setting whether to supply a 12 V output to devices such as an external screen equipped with a trigger function. Setting Description Off No output. Power Outputs control signals (12 V) from the trigger terminal when the power is turned on. Anamo Outputs control signals when the "Anamorphic" setting is changed from "Off" to a setting other than "Off". Outputs control signals when the projector is powered on if "Anamorphic" is configured to a setting other than "Off" when the power is turned on. Inst. Mode 1 to Inst. Mode 10 Outputs control signals when the "Installation Mode" number to be retrieved is the same as the number configured. Outputs control signals when the projector is powered on if the "Installation mode" has the same number as this setting when the power is turned on. * When a setting other than "Off" is selected, the control signal output is stopped when the cooling function starts once the power is turned off. Off Timer For setting the duration before the power turns off automatically when the projector is not operated. 0 Setting values: "Off", "1 Hour", "2 Hours", "3 Hours" and "4 Hours" * The setting will be retained even after the Off Timer operation has completed. ECO Mode Setting Description On Enables "ECO Mode" to minimize power consumption in the Standby mode. 0 RS-232C / LAN communication cannot be used in the Standby mode. 0 If there is no signal transmission and operation for 20 minutes while an image is projected, the power management switches the equipment automatically into standby mode. Off Select this option to control via RS-232C / LAN communication in the Standby mode or if Control4 is to be used. * If this unit enters into standby while "ECO Mode" is set to "On", all the indicators on the unit including the "STANDBY/ ON" indicator are turned off. To turn on the power from this state, use the [STANDBY/ON] button on the unit. Alternatively, press any button on the remote control once to cancel the standby mode then press the [ON] button on the remote control. 64