JVC DLA-NX5 Operation Manual 1 - Page 69
Resetting the Lamp Time, On the Reset Lamp Time? screen
View all JVC DLA-NX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Resetting the Lamp Time Reset the lamp time when you have replaced the lamp. It provides an estimated timing for lamp replacement Resetting the lamp time from the menu screen 1 Press the [MENU] button to display the menu 2 Select "Function"""Lamp Reset" from the menu Trigger Off Off Timer Off ECO Mode Off Network Remote Code A High Altitude Mode Off Lamp Reset Factory Reset Software Update 3 On the "Reset Lamp Time?" screen, select "Yes" and press the [OK] button 0 The lamp time is reset to zero. Reset Lamp Time? Yes No Resetting the lamp time using the remote control 1 Insert the power plug into the power outlet Make sure that you operate the 2 remote control in the Standby mode (the power plug is inserted into the outlet, but the power is not turned on) 0 Press the keys according to the sequence of the numbers in the illustration. 0 Make sure that you press a button within two seconds after the last button is pressed. Press the last button for at least two seconds. C B A D Press for 2 seconds or longer 0 The "LIGHT" indicator and "STANDBY/ON" indicator blink alternately for three seconds. After that, the unit switches to the Standby mode. MEMO 0 Reset the lamp time only when you have replaced the lamp. If the lamp time is reset while a lamp is in use, you may lose track of the timing for replacing the lamp. Doing so may result in using the lamp beyond the estimated limit, thereby causing lamp blowout. Maintenance 69