JVC DLA-NX5 Operation Manual 1 - Page 66
Info Information, High Altitude Mode, Factory Reset, Software Update, Adjust/Set
View all JVC DLA-NX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
High Altitude Mode For setting the high altitude mode to "On" or "Off". Set to "On" when using the projector at a location of low atmospheric pressure (higher than 900 m (3,000 ft) above sea level). Factory Reset For restoring the settings of this unit to the factory default. However, the following settings will not be reset. 0 Gamma data saved in "Gamma" " "Correction Value" " "Import". 0 Color profile data saved in "Color Profile" " "Custom1 to Custom6". Software Update For performing a software update. For the latest information on the software, refer to http://www3.jvckenwood.com/english/download/. Information Setting Description Input Displays the currently selected video input terminal. Source Displays the input source. (Displayed only during video signal input) Resolution Displays the image resolution. (Displayed only during PC signal input) H Frequency Displays the horizontal frequency. V Frequency Displays the vertical frequency. Color Depth Color Space Displays the color space and color bit depth of the input video signal. 0 The color bit depth is not displayed when "YCbCr422" is input. 0 The color bit depth is displayed when color bit depth information is received from the source device. Colorimetry Displays the Colorimetry of the input signal. HDR Displays the EOTF information when HDR packet is received. Max CLL/Max FALL Displays the mastering information of the contents during HDR playback. Max CLL: Maximum Content Light Level Max FALL: Maximum Frame Average Light Level 0 The information may not be displayed depending on the player and contents. Lamp Time Displays the number of lamp hours used. Soft Ver. Displays the firmware version. Adjust/Set 66