JVC DT-3D24G1U DT-3D24G1U Operation Manual - Page 13
To view 3D images, To view existing 3D images, To view images taken by two cameras
View all JVC DT-3D24G1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
To view 3D images To view in 3D, enter the 3D mode. The procedures differ between viewing existing 3D images and mixing L and R images taken by two cameras. To view existing 3D images View already 3D-processed images. 1 Input existing 3D images into the SDI IN 1/L, 2/R terminals or DVI-D terminal. ➔ Also compatible with DUAL LINK. 2 Press the INPUT SELECT button corresponding to the input images. 3 Press the 3D button. 4 Press the SELECT button to select a 3D format. ➔ Select a 3D format configured under "SDI FORMAT 1"/"SDI FORMAT 2" or "DVI FORMAT 1"/"DVI FORMAT 2" in the MAIN MENU "3D SETTING." ● Put on the circular polarizing glasses to view in 3D. Press the 3D button to enter the 3D mode that corrects images for viewing with the circular polarizing glasses. ● 3D viewing is not available if the 3D images are not based on LINE BY LINE or SIDE BY SIDE. ● If the SIDE BY SIDE images in DVI input do not seem to be in the right position, adjust the image position under "3D H POSITION" in the SET-UP MENU "H POSITION ADJ." beforehand. ● If necessary, configure the settings such as the MAIN MENU "3D SETTING." ● When inputting LINE BY LINE 3D images in a signal format that scales the screen vertically, use the 1:1 display mode. To view images taken by two cameras Mix L and R images taken by two cameras and convert them to 3D images. 1 Input L images into the SDI IN 1/L terminal and R images into the SDI IN 2/R terminal. ➔ Input L and R images in the same format corresponding to the MIX mode. (For 3G SDI LEVEL B Dual Stream, input into the SDI IN 1/L terminal. For 3G SDI LEVEL B DUAL LINK mapping, input into the SDI IN 1/L and SDI IN 2/R terminals.) 2 Press SDI 1/L or SDI 2/R (INPUT SELECT button). ➔ In the case of 3G SDI LEVEL B Dual stream, press SDI 1/L. 3 Press the MIX button. ➔ Images in SIDE BY SIDE format. 4 Press the 3D button. ● Put on the circular polarizing glasses to view in 3D. Press the 3D button to enter the 3D mode that corrects images for viewing with the circular polarizing glasses. ● If necessary, configure the settings such as the MAIN MENU "3D SETTING" or CAMERA ASSIST MENU. 13