JVC DT-3D24G1U DT-3D24G1U Operation Manual - Page 19
Main Menu, Picture Function, Back Light, 3g Sdi Level B, Sdi Dual Link, 3d Setting
View all JVC DT-3D24G1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
MAIN MENU PICTURE FUNCTION Setting for the picture quality. Item APERTURE *1 APERTURE LEVEL *1 Content Activates/deactivates the function at the level set in "APERTURE LEVEL." Simultaneously corrects the frequency characteristics of the RGB colors. Setting value OFF, ON 01 - 10 I/P MODE Selects a proper mode corresponding to the input picture. NORMAL, CINEMA, FIELD sub menu Display the sub menu which enables you to adjust the items of "PICTURE FUNCTION" while viewing the actual picture. reset Restore the default settings for all the items in "PICTURE FUNCTION." *1 Memorized for each input. BACK LIGHT Setting value: -20 - +20 Adjusts the brightness of the display. 3G SDI LEVEL B Setting value: DS1, DS2 Selects the data stream from two HD SDI signals multiplexed when a 3G SDI LEVEL B signal comes in. ● The setting value will be invalid if a 3G SDI LEVEL B DUAL LINK signal is input. SDI DUAL LINK Setting value: OFF, ON Activates/deactivates the DUAL LINK function of SDI signals. ● "DUAL LINK" is displayed when the setting is set to "ON." (→ "Status indication of DUAL LINK/3G SDI signal information" on page 11) ● Set this setting to "OFF" when an SDI signal other than DUAL LINK SDI is input. 3D SETTING 3D function settings. Item Content Setting value SDI FORMAT 1 *1 Set the first choice for 3D format in SDI input. The setting values and features are as follows. LbL-RL : LINE BY LINE, the first line: R image LbL-LR : LINE BY LINE, the first line: L image SbS-HD-LR : SIDE BY SIDE compressed horizontally, L image on the left SbS-HD-RL : SIDE BY SIDE compressed horizontally, R image on the left SbS-SD-LR : SIDE BY SIDE not compressed, L image on the left SbS-SD-RL : SIDE BY SIDE not compressed, R image on the left LbL-RL LbL-LR SbS-HD-LR SbS-HD-RL SbS-SD-LR SbS-SD-RL • When the 3D mode is "ON" in 3D input, pressing the SELECT button switches between "FORMAT1" and "FORMAT2." SDI FORMAT 2 *1 DVI FORMAT 1 *1 DVI FORMAT 2 *1 Set the second choice for 3D format in SDI input. Set the first choice for 3D format in DVI input. Set the second choice for 3D format in DVI input. SINGLE IMAGE *1 Select a channel to be displayed when the 3D mode is "ON." OFF : Normal 3D (Left and right images) LEFT : L image only RIGHT : R image only OFF LEFT RIGHT FRAME SYNC. FAR LIMIT NEAR LIMIT Synchronize the left and right input signals by forcibly locking the SDI IN 2/R input for the SDI IN 1/L OFF input in MIX mode. ON • The time base cannot be corrected on this product. To take 3D images strictly, perform GENLOCK on the shooting device, and set this setting to "OFF." • When "ON" is selected, the playback proceeds one frame later than when "OFF" is selected. Set the limit of the depth in Cursor mode of "3D cursor." - 0.1% - - 4.0% • The line color changes when the difference between the vertical lines goes beyond the specified range. Set the limit of the pop-up level in Cursor mode of "3D cursor." +01% - +20% • The line color changes when the difference between the vertical lines goes beyond the specified range. L. INTENSITY Set the intensity of lines displayed in the CAMERA ASSIST MENU and "3D cursor." • When "LOW" is selected, the grid lines are displayed translucent in Grid mode of "3D cursor." *1 Works when the MIX mode is "OFF" or invalid. HIGH LOW 19