JVC DT-3D24G1U DT-3D24G1U Operation Manual - Page 14

Setting the CAMERA ASSIST MENU This product is equipped with various camera rig adjustment assist functions for 3D viewing. Use the functions for camera adjustment in shooting. Menu Operations CAMERA ASSIST MENU 1 Press the CAMERA ASSIST button. ➔ The CAMERA ASSIST MENU appears. ● Only works when the SDI input is selected and images available for the MIX mode are input. ● When the CAMERA ASSIST button is pressed while "MARKER" is displayed, "MARKER" disappears and the CAMERA ASSIST MENU appears. 2 Press the button to select an item, and then the button to proceed to the next screen. ● For some items, adjustments will be made by pressing . 3 Press the CAMERA ASSIST button to finish the menu operation. ● Alternetively, press the MENU button to close the menu screen. CAMERA ASSIST MENU RIG SETTING Depending on the stereo camera rig condition, configure the horizontal flip/vertical flip/180-degree rotation settings of an image. ● The settings are retained even when the CAMERA ASSIST MENU closes. Half mirror Half mirror Parallel twin-flex Half of the image is flipped horizontally. ● Select "R-H-MIRROR." Half of the image is flipped vertically. ● Select "R-V-MIRROR." Half of the image is rotated 180 degrees. ● Select "R-ROTATION." Setting value Content OFF Does not rotate or flip the image R-H-MIRROR R-V-MIRROR *1 Horizontally flips images input into the SDI IN 2/R terminal Vertically flips images input into the SDI IN 2/R terminal L-H-MIRROR Horizontally flips images input into the SDI IN 1/L terminal L-V-MIRROR *1 R-ROTATION *1 Vertically flips images input into the SDI IN 1/L terminal Rotates images input into the SDI IN 2/R terminal by 180 degrees L-ROTATION *1 Rotates images input into the SDI IN 1/L terminal by 180 degrees *1 Vertical flip and 180-degree rotation delay the image by 2 frames. The other image will also be delayed and synchronized. 14