JVC DT-3D24G1U DT-3D24G1U Operation Manual - Page 34

Specifications (cont.) Computer signals (preset) DVI-D (HDCP) terminals No. Signal name Resolution Horizontal Vertical Frequency Horizontal (kHz) Vertical (Hz) Scan system 1 VGA60 640 480 31.5 59.9 Non-interlace 2 WVGA60 852 480 31.5 59.9 Non-interlace 3 SVGA60 800 600 37.9 60.3 Non-interlace 4 XGA60 1024 768 48.4 60.0 Non-interlace 5 WXGA (1280) 1280 768 47.8 60.0 Non-interlace 6 WXGA+60 1440 900 55.9 60.0 Non-interlace 7 SXGA60 1280 1024 64.0 60.0 Non-interlace 8 WSXGA+60 1680 1050 65.2 60.0 Non-interlace 9 UXGA60 1600 1200 75.0 60.0 Non-interlace 10 WUXGA60 1920 1200 74.0 60.0 Non-interlace 11 720/60p 1280 720 45.0 60.0 Non-interlace 12 1080/60p 1920 1080 67.5 60.0 Non-interlace 13 720/50p 1280 720 37.5 50.0 Non-interlace 14 1080/50p 1920 1080 56.25 50.0 Non-interlace ● Non-preset signals may not be displayed normally. ● When a preset signal comes in, the signal format is shown on the status display. For other signals, the resolution is shown. Specification of the DVI-D (HDCP) terminal Connect it to the DVI-D output terminal on a personal computer. Pin Input signal No. 1 T.M.D.S Data 2- 2 T.M.D.S Data 2+ 3 T.M.D.S Data 2 shield 4 NC 5 NC 6 DDC Clock 7 DDC Data 8 NC Pin Input signal No. 9 T.M.D.S Data 1- 10 T.M.D.S Data 1+ 11 T.M.D.S Data 1 shield 12 NC 13 NC 14 +5 V Power 15 GND 16 Hot Plug Detect Pin Input signal No. 17 T.M.D.S Data 0- 18 T.M.D.S Data 0+ 19 T.M.D.S Data 0 shield 20 NC 21 NC 22 T.M.D.S Clock shield 23 T.M.D.S Clock+ 24 T.M.D.S Clock- Dimensions Unit: mm (inch) 564 (22 1/4) 99 (4) 51.9 (2 1/8) 1.3 (1/16) VESA mounting holes 100 (Size: 4-M4, depth: 10 mm) 448.6 (17 3/4) (High)/ 413.6 (16 3/8) (Low) 408 (16 1/8) 117 (4 5/8) 100 300 (11 7/8) 51 (2 1/8) 243 (9 5/8) 34